Bedienungsanleitung Blomberg tkf 7350 (Seite 37 von 44) (Deutsch, Englisch)

302202

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

14 - EN

Time delay

With the “Time delay” function you can

delay the program start up to 19 hours.

1. Opentheloadingdoorandputthe

laundry in.

2. Select the drying program and select

the auxiliary functions if required.

3. Press the “Time delay” buttons to

adjust the desired time.

4. Press “Start/Pause/Cancel” button.

The time delay function will start to

countdown.

C Additional laundry may be loaded

during the time delay period.

5. At the end of countdown process,

“:” will light up continuously and the

relevant program follow-up light will

light up according to the selected

program.

C During drying process, the display

shows the estimated time remaining for

the program to finish. The estimated

time displayed on the screen at the

beginning of the drying process

has been calculated on the basis

of an 800 rpm spin speed rate to

dry a maximum load capacity in the

washing machine.

C If the loaded laundry amount is less

than the calculated laundry amount or

if drying has been performed at higher

spin speed, the remaining time may

be less than the time that appears on

the display.

C Incase the laundry is spun at a lower

spin rate than the calculated one and

if “Filter Cleaning” or “Condenser

Cleaning” processes are not carried

out, the remaining time may be longer

than the time shown on the display.

C Dryness level of the laundry is

detected by sensors during a drying

cycle and the remaining time is

updated automatically.

Auxiliary function

Cancel Audio Warning

Yourmachinewillsendoutanaudio

warning when the program comes to

an end. If you do not want to hear this

buzzing, you need to press the “Cancel

Audio Warning” button. The relevant LED

will light up when this button is pressed

and an audio warning will not be given

when the program comes to an end.

C Youcanselectthisfunctioneither

before or after the program starts.

Warning indicators

Timer programming

A warning LED will light up when timer is

programmed.

Child-proof lock

A warning LED will light up as long as the

child-proof lock remains activated.

Filter cleaning

A warning LED will light up to remind filter

cleaning after the program finishes.

C If the filter cleaning warning lights up

continuously, please refer to, “Solution

suggestions for problems”.

Tank full

A warning LED will light up at the end

of the program or when the tank is full

with water. The machine stops operating

when this warning LED lights up during a

program running. To restart the machine,

please drain the water in the water tank.

Press "Start/Pause/Cancel" button to start

the program after you have emptied the

water tank. The warning LED goes off and

the program resumes operating.

Cleaning the condenser.

It will light up periodically after maximum 5

drying cycles for the purpose of reminding.

In this case and after drying, clean as

explained in the section “Maintenance and

Cleaning”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blomberg tkf 7350 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blomberg tkf 7350

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info