Bedienungsanleitung Blomberg TKF 7431 A (Seite 27 von 44) (Holländisch)

491454

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Connecting the water drain hose;

1. Remove the hose on the machine by

pulling it out from its end. Do not use any

tools to take out the hose.

2. Connect the special drain hose supplied

with the machine to the pipe fitting.

3. The other end of the drain hose can be

directly connected to the wastewater

drain or to the washbasin. The fitting

must always be secured in all types of

connections. Your house may be flooded

if the hose gets out of its housing during

water discharge.

Important:

• The hose should be attached to a height of

maximum 80 cm.

• You must be careful not the pinch or bend

the hose.

• The end of the hose should not be bent,

it should not be stepped on and it must

not be folded between the drain and the

machine.

Adjusting the feet

In order to ensure that your machine operates

more silently and vibration-free, it must stand

level and balanced on its feet. Balance the

machine by adjusting the feet.

Rotate the feet to adjust until the machine

stands level and firmly.

C Never unscrew the adjustable feet from

their housings.

Electrical connection

Connect the machine to a grounded outlet

protected by a fuse of suitable capacity as

stated in the technical specifications table. Our

company shall not be liable for any damages

that will arise when the machine is used on a

circuit without grounding.

• Connection must comply with national

regulations.

• If the current value of the fuse or breaker

in the house is less than 16 Amps, have a

qualified electrician install a 16 Amp fuse.

• Power cable plug must be within easy

reach after installation.

• The voltage and allowed fuse or breaker

protection are specified in the “Technical

Specifications” section.

• The specified voltage must be equal to your

mains voltage.

• Do not make connections via extension

cables or multi-plugs.

• The main fuse and switches must have a

contact distance of minimum 3 mm.

B Damaged power cable must only be

replaced by a qualified electrician.

B If the product is faulty, it must not be

operated unless it is repaired! There is the

risk of electric shock!

First use

• To have the product ready for operation

before calling the authorised service agent,

make sure that its location and power

supply installations are appropriate. If they

are not, call a qualified electrician to have

any necessary arrangements carried out.

• Make sure that the power connections of

the product are in accordance with the

instructions given in relevant chapters of

this manual.

Disposing of packaging material

Packaging materials are dangerous to children.

Keep packaging materials in a safe place out

of reach of children. Packaging materials of

your product are manufactured from recyclable

materials. Sort and dispose of them in

accordance with recycled waste instructions.

Do not dispose of them with normal domestic

waste.

Transportation of the machine

1. Unplug the machine from the mains.

2. Remove the water drain (if any) and

chimney connections.

3. Drain water remained in the machine

completely before transportation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blomberg TKF 7431 A Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blomberg TKF 7431 A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info