Bedienungsanleitung Blomberg TKF 7449 S (Seite 16 von 44) (Deutsch, Englisch)

581554

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

16 - EN

programme. (See. Finishing by canceling

the programme)

Speed and function indicators will turn off when

you change the position of the programme

selection knob while the machine is running

(audio warning, drying level and anti-crease

symbols). However, the current programme

continues. If the programme selection knob is

turned back to the current programme, symbols

of those indicators will appear again.

Adding/removing laundry in standby mode

In order to add or remove laundry after the

programme starts:

1. Press the “Start/Pause/Cancel” button to

switch the dryer to “Pause” mode. Drying

process will stop.

2. Open the door at “Pause” position and

close it again after adding or taking out

laundry.

3. Press “Start/Pause/Cancel” button to start

the programme.

C Any laundry added after the drying process

has started may cause the dried clothes in

the machine intermingle with wet clothes

and the result will be wet laundry after the

drying process is over.

C Laundry may be added or taken out

as much as desired during a drying

process, but this process will extend the

programme duration and increase energy

consumption since the drying will be

interrupted continuously. Therefore, it is

recommended to add laundry before the

drying programme has started.

Child-proof lock

There is a child-proof lock to prevent any

programme interruption due to the pressing of

button while the programme is running. The

loading door and all buttons except the “On/

Off” button on the control panel are deactivated

when the child-proof lock is active.

In order to activate the childproof lock, press on

the “audio warning” and “anti-creasing” buttons

simultaneously for 3 seconds.

To start a new programme after the programme

is over or to interrupt the programme, the child-

proof lock should be deactivated. Press the

same buttons for 3 sec. again to deactivate the

child-proof lock.

C Lock symbol will appear on the screen

when the child-proof lock is activated.

Finishing by canceling the programme

The programme which is selected first will

keep on running even if the position of the

programme selection knob is changed when

the dryer is operating. A new programme can

be selected and started after “Programme

cancel” is activated in order to change the

drying programme.

To cancel any selected programme:

• Press “Start/Pause/Cancel” button for

about 3 seconds. “Filter cleaning” and

“Water tank” warning symbols light up and

“End” label appears on the screen as a

reminder at the end of this period.

A As the inside of the dryer will be excessively

hot when you cancel the programme while

the dryer is running, activate the ventilation

programme to cool it down.

A If the position of the programme selection

knob is changed after stopping the dryer

while it is running at any programme, an

audio warning will be heard since the

running programme is not cancelled (if the

“Cancel audio warning” is not selected).

Dryer will not operate even you press the

“Start/Pause” button unless it is switched

back to the previously running programme.

You must cancel the ongoing programme

in order to change the drying programme.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blomberg TKF 7449 S Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info