Bedienungsanleitung Blomberg TKF 8431 S (Seite 16 von 68) (Englisch, Dänisch)

582141

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Cleaning the condenser

Warning symbol turns on with certain intervals

to remind that the condenser needs cleaning.

Door open

Dryer door open symbol lights up.

Time delay

With the “Time delay” function you can delay

the programme start up to 24 hours.

1. Open the loading door and put the laundry

in.

2. Set the drying programme and spin speed,

and if required, select the auxiliary functions.

3. Press “Time delaying” buttons “+” and “-” to

set the desired time delay. The time delay

symbol will flash.

4. Press “Start/Pause/Cancel” button. Then the

time delay starts to count down. The Time

delay symbol lights up. Start symbol lights

up.

The “:” in the middle of the displayed time delay

will start flashing.

More laundry may be loaded or taken out

during the time delay period. At the end of the

time delay countdown process, time delay

symbol fades, drying process starts and the

programme duration is displayed. The time on

the display is the total of normal drying time

and delay time.

Time delay is started by pressing the start/

pause/cancel button in the exemplary figure.

Changing the delay time

If you want to change the time during the

countdown:

1. Press “Start/Pause/Cancel” button for 3

seconds to cancel the programme. Time

delay function must be set again for the

required time.

2. Press Time delay buttons “+” or “-” to set

the desired time delay.

3. Press “Start/Pause/Cancel” button. The

Time delay symbol lights up. Pause symbol

fades. Start symbol lights up.

4. The “:” in the middle of the displayed time

delay will start flashing.

Canceling the time delay

If you want to cancel the time delay countdown

and start the programme immediately:

1. Press “Start/Pause/Cancel” button for 3

seconds to cancel the programme.

2. Then, press “Start/Pause/Cancel” button to

start the desired programme.

Starting the programme

1. Press “Start/Pause/Cancel” button to start

the programme.

2. “Start/Pause” symbol will light up to indicate

that the programme has started and “:”

symbol between the remaining time will

continue flashing.

Progress of programme

Drying

Iron

Wardrobe

(Extra)

Ventilation

Anti-

creasing

The progress of a running programme is shown

through a number of symbols on the screen.

At the beginning of each programme step, the

relevant symbol in the series of symbols will

light up and thus, all symbols will remain lit up

at the end of the programme. The symbol that

is lit up at the far right of the series of symbols

indicates the step that is being carried out.

“Drying”:

- Lights up in all programmes apart from drying

and ventilation.

“Iron Dry”:

- Starts to illuminate when the drying degree

reaches “iron dry” step and remains illuminated

until the next step.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blomberg TKF 8431 S Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info