Bedienungsanleitung Blomberg tkf 8439 (Seite 16 von 44) (Deutsch, Englisch)

303781

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Warning symbol turns on with certain

intervals to remind that the condenser

needs cleaning.

Door open

Dryer door open symbol lights up.

Time delay

With the “Time delay” function you can

delay the programme start up to 24 hours.

1. Open the loading door and put the

laundry in.

2. Set the drying programme and spin

speed, and if required, select the

auxiliary functions.

3. Press “Time delaying” buttons “+” and

“-” to set the desired time delay. The

time delay symbol will flash.

4. Press “Start/Pause/Cancel” button.

Then the time delay starts to count

down. The Time delay symbol lights up.

Start symbol lights up.

The “:” in the middle of the displayed time

delay will start flashing.

More laundry may be loaded or taken out

during the time delay period. At the end of

the time delay countdown process, time

delay symbol fades, drying process starts

and the programme duration is displayed.

The time on the display is the total of

normal drying time and delay time.

Time delay is started by pressing the start/

pause/cancel button in the exemplary

figure.

Changing the delay time

If you want to change the time during the

countdown:

1. Press “Start/Pause/Cancel” button for

3 seconds to cancel the programme.

Time delay function must be set again

for the required time.

2. Press Time delay buttons “+” or “-” to

set the desired time delay.

3. Press “Start/Pause/Cancel” button. The

Time delay symbol lights up. Pause

symbol fades. Start symbol lights up.

4. The “:” in the middle of the displayed

time delay will start flashing.

Canceling the time delay

If you want to cancel the time delay

countdown and start the programme

immediately:

1. Press “Start/Pause/Cancel” button for 3

seconds to cancel the programme.

2. Then, press “Start/Pause/Cancel”

button to start the desired programme.

Starting the programme

1. Press “Start/Pause/Cancel” button to

start the programme.

2. “Start/Pause” symbol will light up

to indicate that the programme has

started and “:” symbol between the

remaining time will continue flashing.

Progress of programme

Drying

Iron

Wardrobe

(Extra)

Ventilation

Anti-

creasing

The progress of a running programme is

shown through a number of symbols on

the screen.

At the beginning of each programme

step, the relevant symbol in the series

of symbols will light up and thus, all

symbols will remain lit up at the end of

the programme. The symbol that is lit up

at the far right of the series of symbols

indicates the step that is being carried out.

“Drying”:

- Lights up in all programmes apart from

drying and ventilation.

“Iron Dry”:

- Starts to illuminate when the drying

degree reaches “iron dry” step and remains

illuminated until the next step.

“Wardrobe Dry”:

Starts to illuminate when the drying degree

reaches “wardrobe dry” step, and remains

illuminated until the next step.

“Wardrobe Dry Extra”:

Starts to illuminate when the drying degree

reach to “wardrobe dry extra” step.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blomberg tkf 8439 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blomberg tkf 8439

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info