Bedienungsanleitung Blomberg TKF 8451 SGC 30 (Seite 3 von 48) (Englisch, Finnisch)

582153

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

1 Important safety instructions

This section contains safety instructions that will help

protect from risk of personal injury or property damage.

Failure to follow these instructions shall void any

warranty.

General safety

• Never place the product on a carpet-covered floor;

otherwise, lack of airflow beneath the machine will

cause electrical parts to overheat. This will cause

problems with your product.

• Do not operate the product if the power cable

/ plug is damaged. Call the Authorized Service

Agent.

• Do not make any changes on the plug supplied

with the product. If it is not compatible with the

socket, have a qualified electrician change the

socket with a suitable one.

• Never touch the plug with wet hands! Never unplug

by pulling on the cable, always pull out by grabbing

the plug.

• Connect the product to a grounded outlet protected

by a fuse of suitable capacity as stated in the

technical specifications table.

• Power cable of this product is equipped with a

conductor and a grounding plug that allows for

grounding the product. This plug must be inserted

into a socket which is installed and grounded in

accordance with the local laws and regulations.

Grounding installation decreases the risk of electric

shock by opening a path with low resistance

for the electricity flow in case of a malfunction

or failure. Do not neglect to have the grounding

installation made by a qualified electrician. If you

have any suspect about the grounding installation,

have it checked by a qualified electrician or the

Authorized Service Agent. Our company shall not

be liable for any damages that will arise when the

product is used without grounding in accordance

with the local regulations.

• The product should not be plugged in during

installation, maintenance, cleaning and repair

works.

• Always have the installation and repairing

procedures carried out by the Authorized Service

Agent. Manufacturer shall not be held liable for

damages that may arise from procedures carried

out by unauthorized persons.

• Do not use electrical devices in the product.

• Do not connect the air exit of the product to the

chimney holes which are used for the exhaust

fumes of the devices operating with gas or other

types of fuel.

• You must provide enough ventilation in order to

prevent gases exiting from devices operating with

other types of fuels including the naked flame from

accumulating in the room due to the back fire

effect.

• Items cleaned or washed with gasoil/fuel oil,

dry-laundry solvents and other combustible or

explosive materials as well as the items that are

contaminated or spotted with such materials

should not be dried in the product since they emit

flammable or explosive vapor.

• Do not dry the laundry cleaned with industrial

chemicals in the dryer.

• Underwear that contains metal reinforcements

should not be dried in the dryer. Dryer can get

damaged if metal reinforcements come loose and

break off during drying.

• Never attempt to repair the product yourself. Do

not perform any repair or replacement procedures

on the product even if you know or have the ability

to perform the required procedure unless it is

clearly suggested in the operating instructions or

the published service manual. Otherwise, you will

be putting your life and others' lives in danger.

• For failures that you cannot remedy by applying

the procedures in safety instructions, turn off and

unplug the product and call the Authorized Service

Agent.

• Do not reach into the machine when the drum is

spinning.

• Do not use extension cords, multi-plugs or

adaptors to connect the dryer to power supply

in order to decrease the risk of fire and electric

shock.

• Never wash the product by spreading or pouring

water onto it! There is the risk of electric shock!

The final step of the drying programme, namely

the cool-down step is performed without applying

heat to ensure that the laundry items are kept at

a temperature that will not damage them. If you

open the loading door before the cool-down step

completes, hot vapour will come out.

Never stop the dryer before the programme

completes. If you must do this, remove all laundry

quickly and lay them out to a suitable place to

dissipate the heat.

• Always clean the lint filter before or after each

loading. Never operate the dryer without the lint

filter installed.

• Clean inside and exhaust duct of the product

regularly. Do not allow fibre, dust and dirt

accumulation around the exhaust exit and at

adjacent areas.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blomberg TKF 8451 SGC 30 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info