Bedienungsanleitung Blomberg TKF 9431 A (Seite 6 von 48) (Deutsch, Englisch)

582142

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

C Never unscrew the adjustable feet from

their housings.

Electrical connection

Connect the machine to a grounded outlet

protected by a fuse of suitable capacity as

stated in the technical specifications table. Our

company shall not be liable for any damages

that will arise when the machine is used on a

circuit without grounding.

• Connection must comply with national

regulations.

• If the current value of the fuse or breaker

in the house is less than 16 Amps, have a

qualified electrician install a 16 Amp fuse.

• Power cable plug must be within easy

reach after installation.

• The voltage and allowed fuse or breaker

protection are specified in the “Technical

Specifications” section.

• The specified voltage must be equal to your

mains voltage.

• Do not make connections via extension

cables or multi-plugs.

• The main fuse and switches must have a

contact distance of minimum 3 mm.

B Damaged power cable must only be

replaced by a qualified electrician.

B If the product is faulty, it must not be

operated unless it is repaired! There is the

risk of electric shock!

First use

• To have the product ready for operation

before calling the authorised service agent,

make sure that its location and power

supply installations are appropriate. If they

are not, call a qualified electrician to have

any necessary arrangements carried out.

• Make sure that the power connections of

the product are in accordance with the

instructions given in relevant chapters of

this manual.

You can directly send the accumulated water

out through the water drain hose supplied with

the machine instead of periodically draining the

water collected in the water tank.

Please refer to the detailed instructions supplied

with the accessories pack.

Connecting the water drain hose;

1. Remove the hose on the machine by pulling

it out from its end. Do not use any tools to

take out the hose.

2. Connect the special drain hose supplied with

the machine to the pipe fitting.

3. The other end of the drain hose can be

directly connected to the wastewater drain

or to the washbasin. The fitting must always

be secured in all types of connections. Your

house may be flooded if the hose gets out of

its housing during water discharge.

Important:

• The hose should be attached to a height of

maximum 100 cm.

• You must be careful not the pinch or bend

the hose.

• The end of the hose should not be bent, it

should not be stepped on and it must not be

folded between the drain and the machine.

Adjusting the feet

In order to ensure that your machine operates

more silently and vibration-free, it must stand

level and balanced on its feet. Balance the

machine by adjusting the feet.

Rotate the feet to adjust until the machine

stands level and firmly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blomberg TKF 9431 A Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info