Bedienungsanleitung Blomberg wnf 7341 a (Seite 13 von 68) (Deutsch, Englisch, Italienisch)

315452

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

display. The Child Lock does not allow any

change in the programmes and the selected

temperature, speed and auxiliary functions.

Even if another programme is selected with the

ProgrammeSelectionknobwhiletheChildLock

is active, previously selected programme will

continue running.

To activate the Child Lock:

Press and hold 1

and 2

AuxiliaryFunctionbuttons

for 3 seconds. The lights on the 1

and 2

Auxiliary

Functionbuttonswillflash,and"C03","C02","C01"

will appear on the display respectively while you keep

thebuttonspressedfor3seconds.Then,"Con"

will appear on the display indicating that the Child

Lockisactivated.Ifyoupressanybuttonorturnthe

ProgrammeSelectionknobwhentheChildLockis

active, same phrase will appear on the display. The

lightsonthe1stand2ndauxiliaryfunctionbuttons

thatareusedtodeactivatetheChildLockwillblink

3 times.

To deactivate the Child Lock:

Press and hold 1

and 2

auxiliaryfunctionbuttons

for 3 seconds while any programme is running. The

lights on the 1

and 2

AuxiliaryFunctionbuttons

will flash, and "C03", "C02", "C01" will appear on

thedisplayrespectivelywhileyoukeepthebuttons

pressedfor3seconds.Then,"COFF"willappear

on the display indicating that the Child Lock is

deactivated.

 Inadditiontothemethodabove,todeactivate

the Child Lock, switch the Programme Selection

knobtoOn/Offpositionwhennoprogrammeis

running, and select another programme.

Child Lock is not deactivated after power failures

or when the machine is unplugged.

 IfyouswitchoffthemachinebypressingtheOn

/OffbuttonwhentheChildLockisactiveand

the machine is running, then the child lock will

bedeactivated.

Progress of programme

Progressofarunningprogrammecanbefollowed

fromtheProgrammeFollow-upindicator.Atthe

beginningofeveryprogrammestep,therelevant

indicator light will turn on and light of the completed

step will turn off.

You can change the auxiliary functions, speed

and temperature settings without stopping the

programme flow while the programme is running.

To do this, the change you are going to make must

beinastepaftertherunningprogrammestep.Ifthe

changeisnotcompatible,relevantlightswillflashfor

3 times.

 Ifthemachinedoesnotpasstothespinning

step,RinseHoldfunctionmightbeactiveorthe

automaticunbalancedloaddetectionsystem

mightbeactivatedduetotheunbalanced

distributionofthelaundryinthemachine.

Loading door lock

There is a locking system on the loading door of the

machine that prevents opening of the door in cases

whenthewaterlevelisunsuitable.

Loading door light will start flashing when the

machine is switched to Pause mode. Machine

checksthelevelofthewaterinside.Ifthelevelis

suitable,LoadingDoorlightilluminatessteadilywithin

1-2minutesandtheloadingdoorcanbeopened.

Ifthelevelisunsuitable,LoadingDoorlightturnsoff

andtheloadingdoorcannotbeopened.Ifyouare

obligedtoopentheLoadingDoorwhiletheLoading

Doorlightisoff,youhavetocancelthecurrent

programme; see "Canceling the programme".

Changing the selections after

programme has started

Switching the machine to pause mode

PresstheStart/Pausebuttontoswitchthemachine

to pause mode while a programme is running.

The light of the step which the machine is in starts

flashingintheProgrammeFollow-upindicatorto

showthatthemachinehasbeenswitchedtothe

pause mode.

Also,whentheloadingdoorisreadytobeopened,

LoadingDoorlightwillalsoilluminatecontinuouslyin

addition to the programme step light.

Changing the speed and temperature settings

for auxiliary functions

Dependingonthesteptheprogrammehasreached,

you may cancel or activate the auxiliary functions;

see, "Auxiliary function selection".

You may also change the speed and temperature

settings; see, "Spin speed selection" and

"Temperature selection".

 Ifnochangeisallowed,therelevantlightwill

flash for 3 times.

Adding or taking out laundry

PresstheStart/Pausebuttontoswitchthemachine

topausemode.Theprogrammefollow-uplightof

the relevant step during which the machine was

switched into the pause mode will flash. Wait until

theLoadingDoorcanbeopened.OpentheLoading

Doorandaddortakeoutthelaundry.Closethe

LoadingDoor.Makechangesinauxiliaryfunctions,

temperature and speed settings if necessary. Press

Start/Pausebuttontostartthemachine.

The loading door will not open if the water

temperature in the machine is high or the water

levelisabovethedooropening.

Canceling the programme

To cancel the programme, turn the Programme

Selectionknobtoselectanotherprogramme.

Previousprogrammewillbecanceled.End/

Cancel light will flash continuously to notify that the

programmehasbeencanceled.

Pumpfunctionisactivatedfor1-2minutesregardless

of the programme step, and whether there is water

in the machine or not. After this period, your machine

willbereadytostartwiththefirststepofthenew

programme.

 Dependingonthestepwheretheprogramme

was canceled in, you may have to put detergent

and softener again for the programme you have

selected anew.

 Ifyouwanttoopentheloadingdoorafteryou

havecancelledtheprogrammebutitisnot

possibletoopentheloadingdoorsincethe

waterlevelinthemachineisabovetheloading

door opening, then turn the Programme

Blomberg wnf 7341 a Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info