Bedienungsanleitung Blomberg WNF 8422 ZE20 (Seite 14 von 71) (Englisch, Dänisch)

581982

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

display starts flashing.

Canceling the Delayed Start function

Ifyouwanttocancelthedelayedstartcountdown

and start the programme immediately:

PressStart/Pause/Cancelbutton.“:”signinthe

middle of the delayed start time on the display stops

flashing.Startsymboldisappears.Pausesymbol

andDelayedStartsymbolflashes.Decreasethe

delayedstarttimebypressingtheDelayedStart

-button.Programmedurationappearsafter30

minutes.PressStart/Pause/Cancelbuttonto

start the programme.

Starting the programme

PressStart/Pause/Cancelbuttontostartthe

programme.Startsymbolshowingthestartupof

the programme will turn on. Loading door is locked

andDoorLockedsymbolappearsonthedisplay.

Thesymbolofthestepfromwhichtheprogramme

has started appears on the display (Prewash, Main

Wash, Rinse, Softener and Spin).

Progress of programme

Progress of a running programme is indicated on

thedisplaywithasetofsymbols.

Relevantsymbolappearsonthedisplayat

thebeginningofeachprogrammestepandall

symbolsremainlitattheendoftheprogramme.

Thefarthermostrightsymbolindicatesthecurrent

programme step.

Prewash

IfthePrewashauxiliaryfunctionisselected,

Prewashsymbolappearsonthedisplayindicating

that the prewash step has started.

Main Wash

MainWashsymbolindicatingthatthemainwash

step has started appears on the display.

Rinse

Rinsesymbolindicatingthattherinsingstephas

started appears on the display.

Softener

Softenersymbolindicatingthatthesoftenerstep

has started appears on the display.

Spin

Appearsatthebeginningofthefinalspinstep

and remains lit during Spin and Pump special

programmes.

 Ifthemachinedoesnotpasstothespinning

step,RinseHoldfunctionmightbeactiveorthe

automaticunbalancedloaddetectionsystem

mightbeactivatedduetotheunbalanced

distributionofthelaundryinthemachine.

Loading door lock

There is a locking system on the loading door of the

machine that prevents opening of the door in cases

whenthewaterlevelisunsuitable.

DoorLockedsymbolappearswhentheloading

doorislocked.Thissymbolwillflashuntilthe

loadingdoorbecomesreadytoopenwhen

programme completes or the machine is paused.

Donotforcetoopentheloadingdoorinthisstep.

Symboldisappearswhenthedoorisreadyto

open.Youcanopenthedoorwhenthesymbol

disappears.

Changing the selections after

programme has started

Switching the machine to pause mode

PresstheStart/Pause/Cancelbuttontoswitch

themachinetopausemode.Pausesymbol

appears on the display indicating that the machine

ispaused.Startsymboldisappears.

Changing the speed and temperature

settings for auxiliary functions

Dependingonthesteptheprogrammehas

reached, you may cancel or activate the auxiliary

functions; see, "Auxiliary function selection".

You may also change the speed and temperature

settings; see, "Spin speed selection" and

"Temperature selection".

Adding or taking out laundry

PresstheStart/Pause/Cancelbuttontoswitch

the machine to pause mode. The programme

follow-uplightoftherelevantstepduringwhichthe

machine was switched into the pause mode will

flash. WaituntiltheLoadingDoorcanbeopened.

OpentheLoadingDoorandaddortakeoutthe

laundry.ClosetheLoadingDoor.Makechangesin

auxiliary functions, temperature and speed settings

ifnecessary.PressStart/Pause/Cancelbuttonto

start the machine.

The loading door will not open if the water

temperature in the machine is high or the water

levelisabovethedooropening.

Child Lock

UseChildLockfunctiontopreventchildrenfrom

tampering with the machine. Thus you can avoid

any changes in a running programme.

You can switch on and off the machine with

On/OffbuttonwhentheChildLockisactive.

When you switch on the machine again,

programme will resume from where it has

stopped.

To activate the Child Lock:

Press and hold 2

and 4

AuxiliaryFunctionbuttons

for 3 seconds. “Con” appears on the display.

Same phrase will appear on the display if you

pressanybuttonwhenChildLockisenabled.

To deactivate the Child Lock:

Press and hold 2

and 4

AuxiliaryFunctionbuttons

for3seconds.“COFF”appearsonthedisplay.

 Donotforgettodisablethechildlockatthe

endoftheprogrammeifitwasenabledbefore.

Otherwise,machinewillnotallowtoselecta

new programme.

Canceling the programme

PressandholdStart/Pause/Cancelbuttonfor3

seconds.Startsymbolflashes.Symbolofthestep

at which the programme was cancelled remains lit.

"END" appears on the display and the programme

is cancelled.

Blomberg WNF 8422 ZE20 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info