Bedienungsanleitung Bluesound DUO D30 (Seite 5 von 43) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch)

581333

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

your local municipality, your waste disposal service or the point of

sale where you purchased the items.

By ensuring compliance and conformance to proper disposal of waste batteries, potential

hazardous effects on human health is prevented and the negative impact of batteries

and waste batteries on the environment is minimized, thus contributing to the protection,

preservation and quality improvement of the environment.

RECORD YOUR MODEL NUMBER (NOW, WHILE YOU CAN SEE IT)

The model and serial number are located on the back of the cabinet. For your future

convenience, we suggest that you record these numbers here:

Model no: _________________________________

Serial no.: _________________________________

II. QUICK START

a. Attach the supplied adhesive backed bumpers near the corners of the speaker’s

bottom surface to protect the ﬁnish of speakers and furnishings.

b. Position D20 speakers as symmetrically as possible, at a comfortable distance from

your seating position—slightly closer to each other than they are to you.

Ideal Speaker Placement: 2.1 One of possible subwoofer locations

c. Using standard two-conductor (18 gauge/1.0mm dia) speaker wire or better, connect

the Red (positive) binding post of each speaker to the Red speaker connector of your

Bluesound Powernode. Similarly, connect the Black (negative) binding post on each

speaker to the Black speaker connector of your Bluesound Powernode. Be sure to

follow color-coding to make sure that your speakers are “in phase” for smoothest

sound with deepest bass.

d. The loudest bass output from a subwoofer will come from corner placement. As

you position the subwoofer outward from the corner along one wall or another, bass

output diminishes somewhat, it also becomes more uniform throughout the room,

with fewer of the “standing waves” that produce peaks and nulls at various points.

Select the AC Power Cord appropriate for your region and plug it into the subwoofer,

and then into your wall outlet. Using a subwoofer cable (not supplied) plug one

end into either of the Low Level Inputs of the D10 Subwoofer. Plug the other end of

the subwoofer cable into the subwoofer output of the Bluesound Powernode. Set

the subwoofer’s crossover control to the 12 o’clock position, set the phase switch to

0° and volume control to the 12 o’clock position. Flip the Power Switch to the on

position.

e. Ensure that the Bluesound Powernode is conﬁgured for the D30 Sub/Sat System

by opening the Bluesound App on your control device and selecting the Powernode

(right-hand Slide-out Menu Drawer). Once selected, navigate to “Control Panel/

Speaker setup” (using Navigation Menu Drawer) and select Bluesound D30.

III. TROUBLESHOOTING

a. If a speaker begins to sound distorted, or seems to be missing certain frequencies,

check ﬁrst to see whether playing at a lower volume seems to clear up the problem.

It can be especially important to turn down the volume right away if you have

pushed an ampliﬁer or receiver past its comfortable limits.

b. Determine if the problem is the speakers, the Bluesound Powernode, or the

wire connections. If a problem on one speaker doesn’t go away, interchange the

speaker wire connections on your Bluesound Powernode, so that the left speaker

is connected to the right channel, and vice versa. If the problem shifts to the other

speaker, the problem is not in the speaker (Another component-or, very often, a

cable or connection problem between components-may be at fault.) If the problem

stays in the same speaker, swap the speaker cables next. If the problem remains

in the same speaker, irrespective of the channel to which it’s connected and the

connecting wire used, the speaker itself probably needs service.

N150

D20 D20

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bluesound DUO D30 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info