Bedienungsanleitung Blumfeldt 10031978 Cosmic Beam (Seite 13 von 21) (Deutsch, Englisch)

778044

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

Safety Instructions

BEFORE THE FIRST USE

Read and follow all the instructions in this”USE AND CARE”even if you feel you are familiar

with the product , and nd a place to keep it handy for future reference..

• Read all instruction carefully before using the product, and keep them for future refer-

ence.

• Use only the voltage specied on the rating plate of the heater.

• Outdoor use only.

• Do not cover the grilles, block entry or exhaust of airow by placing appliance against

any surface. keep all object at least 1 meter from the front, side and rear of appliance.

• Do not place the product close to a radiant heat source.

• Do not using in areas where near the gasoline, paint or other ammable liquids are

used or stored.

• When the heater on the working sate . To avoid burns, do not let bare skin touch the

hot surface. Switch o and let cooling before moving.

• Do not immerse in liquid or allow running into the interior of the heater, as this could

create an electrical shock hazard.

• Do not operate any appliance with a damaged cord, plug or after the appliance mal-

functions or has been dropped or damaged in any manner.

• Return to the qualied electrical person for examination, electrical of mechanical ad-

justment, service or repair.

• Do not touch the appliance with wet hands.

• The most common cause of overheating is deposits of dust or u in the heater.

Ensure these deposits are removed regularly by unplugging the heater and vacuum

cleaning air vents and grilles.

• Do not use a abrasive cleaning appliance. Clean with a damp cloth( not wet) rinsed

in to soapy water only. Always remove plug from the mains supply before cleaning.

• Do not connect the appliance to the mains voltage until completely installation and

adjusted.

• Do not use the product in the immediate surrounds of a bath, a shower or a swimming

pool or other liquids.

• Be ensure not connect the power cord when not operating the heater.

• Do not allow cord to come in contact with heated surface during operation.

• Do not run cord under the place where people walking usually. To avoid heater trip-

ping or people fall.

• Do not twist, kink or warp the cord around the heater, as this may cause the insula-

tion to waken and split. Always ensure that all cord has been removed from any cord

storage area.

• Do not store heater while it is still hot.

• This appliance is not be used by young children or inrm person without supervision.

• Do not locate this appliance below the socket- outlet.

• Do not use this appliance with another programmer, timer or any other device that

switches the heater on automatically, since a re risk exists if the heater is covered

or positioned in incorrectly.

• All cover of this appliance is intended to protect direct access to the heating elements

and must be in place when the appliance is in working state.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blumfeldt 10031978 Cosmic Beam Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info