Bedienungsanleitung BMW M5 - 2006 (Seite 186 von 231) (Englisch)

624608

186

Zoom out

Zoom in

Vorherige Seite

1/231

Nächste Seite

Under the hood

184

Add at least 0.5 US quart/0.5 liter of oil, other-

wise the oil level check cannot reliably display

the current oil level.<

Continuous exposure to used oil has

caused cancer in laboratory testing.

For this reason, any skin areas that come into

contact with oil should be thoroughly washed

with soap and water.

Keep oil, grease etc. out of reach of children and

observe the warnings on the containers to pre-

vent health risks.<

For immediate updating of the oil level

display, carry out a quick measurement

directly afterward.<

Oil change

Have oil changed only at your BMW center or

at a workshop that works according to BMW

repair procedures with correspondingly trained

personnel.

Approved engine oils

The quality of the engine oil selected has critical

significance for the operation and service life of

an engine. BMW continuously approves spe-

cific oils after confirming their suitability for use

in its vehicles with extensive testing.

Do not use oil additives, as these may

result in engine damage.<

Your BMW center will be happy to answer

detailed questions on BMW High Perfor-

mance Synthetic Oil or approved synthetic

oils.<

You can also call BMW of North America at

1-800-831-1117 or visit the website at

www.bmwusa.com to obtain this information.

Viscosity grades

Viscosity is a measure of an oil's flow rating and

is specified in SAE grades.

Approved oils belong to the SAE grade

10W-60.<

Alternative oil types

If BMW High Performance Synthetic Oil is

unavailable, you can add small quantities of

other synthetic oils between oil changes.

Only use oils with the following specifications:

> Viscosity

preferred: SAE 10W-60;

alternative: SAE 10W-40, SAE 5W-50 or

SAE 10W-50

> Specification

API SJ/CF, API SK/CF or higher

Low ambient temperatures

The oils used by BMW from the factory for your

vehicle model can be used at virtually all ambi-

ent temperatures. However, if the vehicle is

operated for a longer period at temperatures

below –47/–206, your BMW center will be

happy to recommend a suitable oil.

Coolant

Do not add coolant to the cooling system

when the engine is hot. Escaping coolant

can cause burns.<

Coolant is comprised of water and coolant addi-

tive. Not all commercially available additives are

suitable for your BMW. Ask your BMW center

for suitable additives.

Only use suitable additives, otherwise

engine damage may result. The additives

present a health hazard; observe the instruc-

tions on the containers.<

Comply with the appropriate environ-

mental protection regulations when dis-

posing of coolant additives.<

Checking coolant level

1. The engine must be at ambient tempera-

ture.

2. Turn the cap of the expansion tank counter-

clockwise to allow any accumulated pres-

sure to escape, then continue turning to

open.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BMW M5 - 2006 Seite 186

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info