Bedienungsanleitung Bobike Exclusive mini (Seite 7 von 106) (Alle Sprachen)

772934

Zoom out

Zoom in

Vorherige Seite

1/106

Nächste Seite

Mounting Block (E4) as shown. Then oﬀer up the assembly to the steering tube. Next

oﬀer up the rear part (E5.2 + E5.3) so that the block entirely surrounds the steering tube.

Then insert the 2 bolts (E3) and washers (E2) into the mounting block (E). Finally tighten

the bolts using the key (E1). Make sure that the mounting block (E) is tightly ﬁxed and

does not move - correct tightening is extremely important for the child’s safety.

4. Having concluded make sure that the mounting block (E) is secure and properly

aligned with the handlebar and the wheel. The mounting block (E) must be ﬁtted as

low as the steering tube allows.

5. To place the seat (A), pull the Handle for Locking / Unlocking the seat (C) and

simultaneously insert the two ends of the steel rod (A1) of the child seat into the

corresponding holes (E4.1) of the mounting block (E4). You will hear a slight click when

the operation is complete and you will see that the ends of the steel rod (A1) appear

beneath the mounting block (E). Make sure the child seat is upright.

6. Then sit on the bike and make sure that steering and braking are not aﬀected by any

component of the child seat. Also make sure that there is enough space for the child

between the seat and the handlebars.

7. To place the child on the seat, you need to remove the Safety belt (B). Press the Safety

Belt button (B4) and push back the Safety belt. Do the same for the other side.

8. According to the child height choose the best seat holes (B5) to place the belt.Then

insert the seat belt on it. You will hear a small click when it´s correctly placed on the

choosen hole (B5).

9. Next adjust the belt to the size of the child to ensure that the child is ﬁrmly secured.

First adjust the height of the belt. To do this, pull the straps (B3) according to the size of

the child. Before starting the journey, always check that the child is secured and that the

belt is snug but not so tight that it hurts the child.

To lengthen the belt, press the release on the adjuster buckle (B2).

After the ﬁnal adjustment of the belt, check that the shoulder straps (B6) are

not too close to the child’s neck to avoided hurting them. The straps should be

positioned slightly above the shoulders, as shown in the picture.

10. Adjust the height of the footrest (D) according to the height of the child. Pull the

footrest button (D2) and position the button at the desired height, release the button

and the footrest will be ﬁtted in the chosen hole.

11. After adjusting the footrest at the desire hight, you need also to adjust the footrest

strap (D1) to ensure the safety of the child. Detach the Feet Strap (D1) from the footrest

part, by pressing the buttom and pushing it out. Then adjust it to the child foot and ﬁt

it again. Make sure that the buckle is not set too narrow so it wont hurt the child.

12. Make sure you have followed and fulﬁlled all the instructions given. When done

so, the child bicycle seat is ready for use. IT IS MANDATORY TO READ the following

chapter on safety instructions about using your child bicycle seat.

Pull the Handle for Locking / Unlocking the seat (C) until the Blocking Legs (C1) unlocks

the Mounting Block (E). Then, pull the child seat upwards and backwards to release it

from the mounting block (E).

13. HOW TO REMOVE YOUR FRONT BABY SEAT

• The rider must be at least 16 years of age; Check legislation and national regulations

pertaining to this.

• Make sure that the weight and height of the child do not exceed the maximum

capacity of the seat, and check this at regular intervals. Check the weight of the child

before using the child seat. Under no circumstances should you use the child bicycle

seat to transport a child whose weight is above the permissible limit.

• Do not carry a child less than 9 months of age in this child bicycle seat. To be a passenger,

the child must be able to sit up straight with the head held upright while wearing a

bicycle helmet. A doctor should be consulted if the child’s growth is questionable.

• Secure the child into child bicycle seat ensuring that all the safety belts and straps

applied ﬁrmly but not so tight as to cause discomfort to the child. Please check the

safety of the fasteners often.

• The child bicycle seat must never be used before adjusting the safety belt.

• Always use all safety restraint system and straps to ensure that the child is secured in

the seat.

• Do not allow any part of the child’s body or clothing, shoelaces, child bicycle seat belts,

etc. to come in contact with moving parts of the bicycle because can be harmful to the

child or cause accidents.

• A wheel protector is recommended to prevent the child from inserting its feet or

hands between the spokes. The use of protection underneath the saddle or the use

INSTRUCTIONS FOR USE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bobike Exclusive mini Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info