497272
8
Zoom out
Zoom in
Vorherige Seite
1/97
Nächste Seite
INSTRUCTION FOR USE
7
FIGURE D
Place the bowl (2) on the base (7), press it down and lock
it in place by turning it in a clockwise direction.
Press the release lever for the mixing arm (6) and lower
the mixing arm (11) slowly.
The stand mixer can be used once the plug is inserted into
the power socket and the ON/OFF switch (5) is turned to ON.
REMOVING THE INDIVIDUAL ATTACHMENTS
Before removing the mixing attachments (8, 9, 10), splash
guard with filler opening (11) or bowl (2), please ensure
that the speed control (4) is set to stop, that the ON/OFF
switch (5) is turned to OFF and that the plug has been
removed from the power socket.
In order to remove the bowl (2) you must first press the
release lever for the mixing arm (6), raise the mixing arm (1)
and release the bowl (2) from the stand mixer by turning
it in an anti-clockwise direction.
In order to remove a mixing attachment (8, 9, 10) you
must first press the release lever for the mixing arm (6),
raise the mixing arm (1) and release the mixing attach-
ment (8, 9. 10) from the stand mixer by turning it in an
anti-clockwise direction.
In order to remove the splash guard with filler opening
(11) you must first press the release lever for the mixing
arm (6), raise the mixing arm (1) and release the bowl
splash guard with filler opening (11) from the stand mixer
by turning it in an anti-clockwise direction.
HOW TO USE THE SPLASH GUARD
WITH FILLER OPENING
After attaching the splash guard with filler opening (11)
as described in «HOW TO USE YOUR STAND MIXER» it will
protect worktops and the stand mixer against spattering.
You can also use the filler opening to add ingredients to
the bowl (2).
CONNECTING THE POWER SUPPLY
The mixing attachments (8, 9, 10) must always be fitted
before connecting the stand mixer to the power supply.
Before connecting the stand mixer to the power supply,
please ensure that the speed control (4) is set to stop and
that the ON/OFF switch (5) is turned off.
Before operating the stand mixer the mixing arm (1) must
have been closed and clicked into position. The stand
mixer has a safety feature which ensures that the stand
mixer cannot start while the mixing arm is raised.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bodum Bistro 11381 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info