Bedienungsanleitung Bomann bs 971 cb (Seite 34 von 54) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Norwegisch)

320243

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

ENGLISH

Technical Data

Model: ..........................................................................BS 971 CB

Power supply: ............................................................230 V, 50 Hz

Power consumption:

nom.

: ............................................................................1200 W

max.

: ............................................................................2000 W

Protection class: .......................................................................... ΙΙ

Net weight: ........................................................................4,70 kg

This device has been tested according to all relevant current

CE guidelines, such as electromagnetic compatibility and low

voltage directives, and has been constructed in accordance with

the latest safety regulations.

Subject to technical changes without prior notice!

Meaning of the “Dustbin” Symbol

Protect our environment: do not dispose of electrical equipment

in the domestic waste.

Please return any electrical equipment that you will no longer

use to the collection points provided for their disposal.

This helps avoid the potential effects of incorrect disposal on the

environment and human health.

This will contribute to the recycling and other forms of reutilisa-

tion of electrical and electronic equipment.

Information concerning where the equipment can be disposed of

can be obtained from your local authority.

Cleaning the Filter Element

CAUTION:

Always empty the dust contai-

ner rst before removing the

lter element.

• Press the button to release

the dust container and then

remove it (see illustration 1).

• Turn the lid in the direction

„

“ and then lift it off, inclu-

ding the lter element.

• Turn the lter element in the

„OPEN“ direction to remove

it from the lid. Remove the

lter element (two parts)

and clean the main lter by

tapping out the contents and

gently brushing.

• Now replace the compon-

ents. Please then turn the

lter element in the CLOSE

direction until it is tight.

• Place the lid on the dust

container - the  arrow is

located above the „ “ symbol

- and then turn it in the „ “

direction until it is tight.

Every third time the dust container

is emptied, or in the case of severe

soiling, clean the lter by allowing

water to ow through the lter

fabric against the direction in which

the vacuum cleaner blows. The

dust container should only be rein-

serted when it is completely dry!

Now place this back in position

once it has completely dried!

CAUTION:

Never wash the ﬁlter in the washing machine, and please

do not use a hairdryer to dry it.

Motor protection ﬁlter

(inlet ﬁlter)

The inlet lter is located in the

dust container compartment. The

lter is located vertically in the

rear section of the dust housing.

Pull the lter out towards the front.

Clean the motor protection lter

approximately every 10th time

you empty the dust container. If

necessary, the lter can also be

washed in warm water without any

additives. Place it back into place

only once it is completely dry!

Outlet ﬁlter (13)

The appliance is also equipped

with an outlet lter. In order

to ensure that the lter works

correctly, we recommend that you

replace it every six months. It is

located on the rear part of your

appliance behind a ventilation

grid. Open the ventilation grille

by pressing the lever on its side.

Then pull the grille out towards

the front. Remove the lter and

clean as described above. Fit the

lter back into place and close

the ventilation grid by following

the steps above in the opposite

order.

 IMPORTANT NOTE!

• Cleaning may become necessary after a shorter time,

depending on the conditions of use, e.g. when vacuuming

ne dust.

• If the suction power of your vacuum cleaner diminishes

please clean the lters as described.

• If the suction power suddenly diminishes during operation

this may be due to the lters being locked.

Cleaning and storage

WARNING:

• Before cleaning remove the mains lead from the socket.

• Under no circumstances should you immerse the device

in water for cleaning purposes. Otherwise this might result

in an electric shock or re.

CAUTION:

• Do not use a wire brush or any abrasive items.

• Do not use any acidic or abrasive detergents.

Cleaning

• Clean the casing with a dry cloth.

• Clean the motor protection lter approximately every 10.

time the vacuum cleaner is emptied. Clean the lter in hot

water without additives. Put it back into place only once it is

completely dry.

Storage

• Let the iron cool down completely.

• Wind the cable completely.

• Insert the hook of the nozzle on the back of the device into

the parking aid (14).

• If you position the device horizontally: Please insert the hook

of the oor nozzle into the parking assistant on the rear of

the device.

• If you position the device vertically: Please insert the hook of

the suction tube into the parking assistant on the bottom of

the device.

05-BS 971 CB Neu.indd 34 01.04.2010 10:24:05 Uhr

Bomann bs 971 cb Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info