Bedienungsanleitung Bomann bs 976 cb (Seite 26 von 42) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Norwegisch)

317756

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

ENGLISH

Floor nozzle

To clean carpets or smooth surfaces.

Smooth ﬂ oors: Press down the lever with the

brush symbol with your foot.

The brush is now visible.

Carpets: Press the lever In the opposi-

te direction. The brushes are

now retracted.

Releasing the nozzles: Pull these off while turning

slightly.

Vacuum power regulator (3)

Low vacuum power: For curtains and delicate

fabrics

Medium vacuum power: For long-pile velour carpets

and textile ﬂ ooring

High vacuum power: For sturdy rugs and ﬂ oors

Telescopic Suction Tube (13)

As the length of the suction tube can be adjusted it can

be adapted to your own personal height. Unlock the

coupling by pressing the button (14) downwards.

Then move the telescopic suction tube to the desired

height. To ﬁ x the suction tube in position, pull it until it is

heard to lock in place.

Cable winding device

Pull out the cable (1) up to the maximum length indicated

with the yellow mark. Never pull the cable out up to the

red mark as the cable winding can be damaged. Said

damages are not covered by the warranty.

Winding

Press the cable (5) winding button and guide the cable.

Hold the cable to avoid wrapping.

Air Slide

Open the air slide on the hose handle in order to regulate

the airﬂ ow or to clear any particles sticking to the nozzle.

Dust bag replacement display (8)

Hold the hose up into air. If the dust bag change display

lights up, the bag is full. Please change it.

Changing the dust bag

• Pull the plug out of the socket.

• Press the button (10) to open the lid of the dust bag

compartment (until its locks in place).

• Pull the dust bag out of the holder.

• Insert a new dust bag.

• Close the cover so that it snaps into place.

Filter

Your appliance has two ﬁ lters.

Motor protection ﬁ lter (inlet ﬁ lter)

The inlet ﬁ lter is located in the dust bag compartment.

Press the button (10) to open the lid of the dust bag

compartment. The ﬁ lter is located vertically in the rear

section of the dust housing. Remove the ﬁ lter by pulling

upwards. Clean the engine protection ﬁ lter after 10 dust

bag changes. If necessary, the ﬁ lter can also be washed

in warm water without any additives. Place it back into

place only once it is completely dry!

Outlet ﬁ lter

The appliance is also equipped with an outlet ﬁ lter. This

ﬁ lter is located in the dust bag space under the ventilation

grille. Open the dust bag compartment. Remove the ﬁ lter

and clean as described above. Please reinsert the ﬁ lter

correctly and then close the ventilation grille.

Coarse Dirt Filter

This collects the coarse dirt.

• Empty the container (7.2) when the MAX. mark is

reached.

• When suction power decreases!

Even if the MAX mark on the coarse dirt ﬁ lter has not

yet been reached it is possible that the suction power

of your vacuum cleaner will decrease. You should

then also clean the container.

• In order to do so, remove the container and the cover.

• Note: The components can be removed or attached

by means of short twists in a clockwise or anticlo-

ckwise direction. Under the cover 7.1 there is an air

duct that also has to be cleaned.

Cleaning and storage

Cleaning

• Pull the plug out of the socket before cleaning!

• Clean the casing with a dry cloth.

Storage

• Let the iron cool down completely.

• Wind the cable completely.

• Please place the machine in a vertical position and

insert the hook on the suction tube into the parking

assistance on the back.

Technical Data

Model: ............................................................. BS 976 CB

Power supply: ................................................230 V, 50 Hz

Power consumption:

nom.

:.................................................................1800 W

max.

:.................................................................2300 W

Protection class: ..............................................................ΙΙ

This device has been tested according to all relevant cur-

rent CE guidelines, such as electromagnetic compatibility

and low voltage directives, and has been constructed in

accordance with the latest safety regulations.

05-BS 976 CB 26 03.03.2006, 8:19:36 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann bs 976 cb Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info