5. Switch the kettle on with the switch (10) in the handle. The control lamp lights
up.
6. The kettle switches off automatically when the water has boiled. Always hold the
lid closed when pouring the water out. Beware of scalding!
Warming Plate and Tea Preparation
For preparing tea your tea station has a glass pot with filter and a warming plate.
1. Please heat your tea water with the kettle (max. 1.25 litres).
2. Place the desired amount of tea into the filter and position the pot with the filter
on the warming plate (2).
3. The warming plate is switched on by the switch (1). Operation is shown by the
control lamp (3).
4. Open the lid (6) of the pot and fill in the required quantity of water.
5. Allow the tea to stand according to taste and then remove the tea filter.
6. The remaining quantity of tea is kept warm until you turn the switch (1) to 0.
Cleaning
• Always pull out the plug from the socket before cleaning!
• Now clean the teapot and the filter in soapy water.
Please do not immerse any other parts of the machine in water.
• The exterior of the machine should be cleaned, if necessary, with a slightly
damp cloth without additives.
• In order to clean the kettle you can remove the lime filter (12) by pulling the filter
upwards. Now you can clear the filter of lime residues under running water.
Decalcification
• The frequency of the decalcifying operation depends on the hardness of the
water and on how often the appliance is used. Decalcify the appliance every 3
to 4 months.
• If the machine switches off before the water boils, it probably needs to be decal-
cified.
• Please do not use vinegar but a commercially available decalcification agent on
the basis of citric acid. Only use the quantities stated in the instructions.
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
34
GB
