First Use of the Machine
Before using the machine for the first time water should be boiled in it twice without
any additives. Do not use this water.
1. Turn the lock in the lid to open it. Fill it with water. Do not overfill!! Close the lid
again.
2. Place the kettle flush on the base.
3. Only connect the machine to a properly installed 230 V, 50 Hz safety socket.
4. Switch on the appliance with the switch under the handle. The LED will light up.
5. After boiling the machine switches off automatically. Disconnect the machine
from the mains electricity supply. When pouring, do not press the lid too much.
Danger of burns!
Cleaning
• Always remove the plug from the mains supply before cleaning the machine!
• The exterior of the machine should be cleaned, if necessary, with a slightly
damp cloth without additives.
• The machine must never be immersed in water!
Decalcification
• The decalcification intervals depend on the hardness of the water and the fre-
quency of use. Decalcification should be carried out every 3 to 4 months.
• If the machine switches off before the water boils, it probably needs to be decal-
cified.
• Please do not use vinegar but a commercially available decalcification agent on
the basis of citric acid. Only use the quantities stated in the instructions.
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
24
GB
