The bread baking machine sets the baking temperature and time automatically. If the bread is too light at the
end of the baling program, use the BACKEN program to let it brown more.
To do so, press the START/STOP key, then select the BACKEN program and start. When the desired
degree of baking has been reached, stop the process.
Warming
WarmingWarming
Warming
Once the baking is over, the buzzer goes off to signal that the bread or specialty can be removed. The 1-hour
warming time starts immediately.
End of the program phases
End of the program phasesEnd of the program phases
End of the program phases
Please switch the appliance off at the end of the programme by setting the On/Off switch (L) to "0". Now
remove the baking tin using oven cloths, turn it over and as long as the bread does not immediately fall onto the
grid, move the kneading shaft back and forth a few times from below until the bread falls out. If one of the
kneading pegs is still stuck in the bread, take the hook supplied with the appliance. Insert it under the warm loaf
of bread into the almost circular opening of the kneading peg and wedge the hook against the lower edge of the
kneading peg preferably where the blade of the kneading peg is located. Then pull the kneading peg carefully
out with the hook.You can now easily cut the bread and remove completely the kneading pegs.
Heating the appliance to make the dough rise
Heating the appliance to make the dough riseHeating the appliance to make the dough rise
Heating the appliance to make the dough rise
The heating is switched on only if the room temperature is lower than 25°C. If the room temperature is above
25°C the ingredients are already at the right temperature and there is no need for pre-heating. For the first and
second rising the room temperature must be above 25°C or high enough to make the dough rise without extra
heating.
Cleaning and Maintenance
Cleaning and MaintenanceCleaning and Maintenance
Cleaning and Maintenance
•Before using the appliance for the first time wash the bread baking machine’s baking tin (never dip in water)
with water and clean the kneading pegs.
•It is highly recommended to coat the new baking tin and the kneading pegs with heat resistant grease
before using them for the first time and let them heat in the oven for about 10 minutes at 160°C. Once
these have cooled down clean away (polish) the grease from the baking tin with a sheet of paper towel.
This operation is to be performed to protect the nonstick coating. This operation can be repeated from time
to time.
•After use always leave the appliance to cool before cleaning it or putting it away. It takes about half an hour
for the appliance to cool and to be ready again for baking and kneading.
•Before cleaning pull out the plug and leave the appliance to cool. Never use chemical cleaning agents,
gasoline, oven cleaners or any detergent that can scratch or ruin the coating.
•Remove all the ingredients and crumbs from the lid, casing and baking compartment with a moist towel.
Never dip the appliance in water nor fill the baking compartment with water!
Never dip the appliance in water nor fill the baking compartment with water!Never dip the appliance in water nor fill the baking compartment with water!
Never dip the appliance in water nor fill the baking compartment with water! The lid can be removed for
easy cleaning. Remove the lid flap behind the lid hinge. You can then carefully remove the lid by pushing it
backwards. To replace it, act in the reverse order.
•Wipe the outside of the baking tin with a moist towel. The inside of the tin can be washed with hot water.
Please do not immerse it in water for longer period and do not use any washing-up liquid.
•Both the kneading pegs and drive shafts need to be cleaned immediately after use. If the kneading pegs
remain in the tin, it becomes difficult to remove them afterwards. In this case fill the container with warm
water and leave it to rest for 30 minutes. Then remove the kneading pegs.
•The baking tin has a nonstick coating. Do not use metal objects that can scratch the surface when cleaning
it. It is normal that the color of the coating changes over the course of time. This change does not alter ist
effectiveness in any way whatsoever.
•Before putting the appliance away for storage, make sure that it is perfectly cool, clean and dry. Put the
Bitte koennen Sie per Email die Bedienungsanleitung Bomann CB 593 in NL schicken? Drucken geht leider nicht. mfG, Yvonne Kerkhof f.kerkhof@online.nl
Eingereicht am 17-11-201713:25
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Bomann cb 593 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.
