Bedienungsanleitung Bomann cb 758 (Seite 25 von 42) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Norwegisch)

321855

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

ENGLISH

7. The control lamp in the switch of the iron indicates

that it is heating up. As soon as the control lamp goes

off the operating temperature has been reached. Now

you can start ironing.

8. Always remove the mains plug after using the machi-

ne.

Steam Ironing

For this a high temperature is needed.

1. Turn the temperature control (1) to position „• • •“

(cotton, linen).

2. Move both operating switches (10/11) to position I.

When the control lamp (5) lights up there is enough

steam for steam operation.

Warning: The steam is hot!

There is a danger of scalding!

3. You can set the desired quantity of steam with the

steam regulator (9).

4. With the steam jet button

you can produce a short

strong jet of steam. Continuous steam is produced by

locking the catch (3) in place.

How can I replenish the water during operation?

If the pressure falls during operation you can ﬁ ll more

water into the tank at the same time.

1. First turn operating switch II

to 0. Operating switch

remains switched to I.

Note: If there is still some residual pressure in the wa-

ter tank, a safety lock prevents the water tank catch

(7) from being opened.

The residual pressure ﬁ rst has to be relieved

before the device can be safely opened.

2. With the steam jet button

you can now release

the residual steam pressure. When no further steam

comes out of the iron sole plate, turn operating switch

to 0. Then please remove the mains plug and

carefully open the water tank lock (7).

Warning: The steam is hot!

There is a danger of scalding!

Note: If it is not yet possible to open the lock of the

water tank the device needs a further 2 to 3 minutes

to cool down. Then release the residual pressure

again.

3. With the help of a funnel ﬁ ll freshwater from a measu-

ring beaker into the water tank. Do not overﬁ ll! Take

care of water splashes that might come out of the

boiler. In order to prevent the water from splashing it

should be ﬁ lled into the funnel slowly after the safety

lock has been opened.

4. Fasten the safety lock again.

5. Insert the power plug back into the socket.

Note: Never open the water tank lock while the

device is

being operated.

When ironing at low temperatures, please ensure that

you reduce the quantity of steam or iron without steam

altogether.

Vertical Steam

This can be used to produce a jet of steam in a vertical

direction.

Self-Cleaning

Any lime residues which form in the sole plate are auto-

matically removed due to the heat and steam pressure.

Cleaning

• Always remove the mains lead before cleaning!

• Wait until the machine has cooled down completely.

• Clean the casing with a slightly damp cloth.

• Clean the sole plate and the rest with a slightly damp

cloth. Do not use any abrasive cleaning agents!

• Any residual water can remain in the water tank, but

should be poured out if it has been in the tank for a

prolonged period.

Technical Data

Model: ...........................................................DBS 758 CB

Power supply: ................................................230 V, 50 Hz

Power consumption: ..............................................2600 W

Protection class: ............................................................... Ι

Maximum ﬁ lling quantity of the water tank:...........0.7 litres

Steam pressure: ..................................................... 3,5 bar

This device has been tested according to all relevant

current CE guidelines,

such as electromagnetic compatibility and low voltage

directives, and has been constructed in accordance with

the latest safety regulations.

Subject to technical changes without prior notice!

Guarantee

The device supplied by our Company is covered by a

24 month guarantee starting on the date of purchase

(receipt).

During the life of the guarantee any fault of the device or

its accessories *) ascribable to material or manufacturing

defects will be eliminated free of charge by repairing or, at

our discretion, by replacing it. The guarantee services do

not entail an extension of the life of the guarantee nor do

they give rise to any right to a new guarantee!

Proof of the guarantee is provided by the proof of

purchase. Without proof of purchase no free replacement

or repair will be carried out.

If you wish to make a claim under the guarantee please

return the entire machine in the original packaging to

your dealer together with the receipt.

*) Damage to accessories does not mean automatic free

replacement of the whole machine. In such cases please

contact our hotline. Broken glass or breakage of plastic

parts are always subject to a charge.

Defects to consumables or parts subject to wearing

(e.g. motor pistons, kneading blades, drive shafts, spare

remote control, spare toothbrushes, saw blades, etc.) as

well as cleaning, maintenance or the replacement of said

parts are not covered by the guarantee and hence are to

be paid!

05-DBS 758 CB_A5 25 02.11.2005, 14:35:22 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann cb 758 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info