Bedienungsanleitung Bomann DTR 353 (Seite 18 von 24) (Deutsch, Englisch)

688046

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

bel located in the interior or on the rear side of the

appliance.

• Place the appliance on a steady and safe surface.

If the appliance is not horizontally leveled, adjust

the feet accordingly.

• Avoid the installation:

Avoid the installation:Avoid the installation:

Avoid the installation:

- near heaters, next to a stove, direct sunlight or

any other heat sources;

- at locations with high humidity (e.g. outdoors,

bathroom), as metal parts would be suscepti-

ble to corrosion under such circumstances;

- near volatile or flammable materials (e.g. gas,

fuel, alcohol, paint, etc.), in rooms which may

have poor air circulation (e.g. garages).

- Do not expose the appliance any weather.

Electrical connection

Electrical connectionElectrical connection

Electrical connection

WARNING:

WARNING:WARNING:

WARNING:

• The installation to the mains supply must conform

to the local standards and regulations.

• Improper connection may cause to an electric

electric electric

electric

shock

shockshock

shock!

• Do not modify the appliance plug. If the plug does

not fit properly to the outlet, let install a proper

outlet by an authorized specialist.

• The accessibility of the power plug must be en-

sured to disconnect the appliance from the power

supply in case of emergency.

• Make sure that the voltage supply matches the

specifications on the rating label before

connecting.

• Connect the mains cable to a properly installed

and earthed wall outlet.

• If the plug after installation is not accessible, a

corresponding disconnect device must be availa-

ble to meet the relevant safety regulations.

Mounting

MountingMounting

Mounting

the door handle

the door handlethe door handle

the door handles

•

Bring the respective door handle into the intended

position and fasten it with the included screws.

•

Put on the handle cover and fix it with the screw.

Startup / Operation

Startup / OperationStartup / Operation

Startup / Operation

Prior to first use

Prior to first usePrior to first use

Prior to first use

CAUTION

CAUTIONCAUTION

CAUTION:

After transport, the appliance should be left standing

upright for about 4 hours before connecting to the

power supply. Nonobservance could lead to malfunc-

tion of the cooling system and causes an appliance

breakdown.

Clean the appliance interior including all accessory

parts. Consider the instructions which we provide in

the chapter “Cleaning and Maintenance”.

Starting

Starting Starting

Starting the appliance

the appliancethe appliance

the appliance

• Connect the appliance to the power supply.

• Operate the temperature control. See also the

section "Settings".

Settings

SettingsSettings

Settings

Setting [ 0 ] means that the appliance is in the off

state. Turn the temperature control clockwise, start-

ing from this setting; the appliance will turn on auto-

matically.

The power levels [ 1–5 ] regulate the different values

of the internal temperature.

Setting 0

Setting 0Setting 0

Setting 0

Setting 1

Setting 1Setting 1

Setting 1

Setting 5

Setting 5Setting 5

Setting 5

Off state Lowest setting

(warmest inside

temperature)

Highest setting

(coldest inside

temperature)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann DTR 353 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info