Bedienungsanleitung Bomann DU 623.1 (Seite 20 von 28) (Deutsch, Englisch)

651969

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

• For extraction mode, you

must also create a feed through of approx. Ø 130 mm in the base of the unit.

•

If the mains cable is fed through the unit, a feed through also must be provided.

•

Drill four mounting holes of Ø 4 mm through the base of the unit. Screw in the appliance with the

including washers (3) under the wall unit and tighten the nuts (4) through the hood body.

•

For extraction mode insert the connecting

Thereto a flexible extraction hose (not supplied)

connected to the outside by an extraction vent.

•

For recirculation mode close the air outlet

•

Reinstall the grease filter grid or aluminum grease filter.

Installing the activated carbon filter

Installing the activated carbon filter Installing the activated carbon filter

Installing the activated carbon filter

mat

mat mat

mat

Model: DU 622

Model: DU 622Model: DU 622

Model: DU 622.1

.1.1

•

Remove the grease filter grid (3) including fleece filter. Loosen the moun

ing wires (1) that hold the fleece filter in position.

•

Insert the previously fitted carbon filter

clamp the mounting wires in again.

•

Reinstall the grease filter grid

Model: DU 623

Model: DU 623Model: DU 623

Model: DU 623.1

.1.1

IXIX

•

Remove the aluminum grease filter (1).

•

Insert the previously fitted carbon

fix the mat parts each with two metal struts (2) (

filter mat).

•

Reinstall the

NOTE

NOTENOTE

NOTE:

The carbon filter mat absorbs

odours

Electrical connection

Electrical connectionElectrical connection

Electrical connection

WARNING:

WARNING:WARNING:

WARNING:

•

The installation to the mains supply must conform to the local standards and regulations.

•

Improper connection may cause to an

• Do not modify the appliance

plug

an authorized specialist.

•

The accessibility of the power plug must be ensured in order to disconnect the

supply in case of an emergency.

must also create a feed through of approx. Ø 130 mm in the base of the unit.

If the mains cable is fed through the unit, a feed through also must be provided.

Drill four mounting holes of Ø 4 mm through the base of the unit. Screw in the appliance with the

including washers (3) under the wall unit and tighten the nuts (4) through the hood body.

For extraction mode insert the connecting

piece with non-return valves (5

) from above onto the air outlet.

Thereto a flexible extraction hose (not supplied)

with an inner diameter of Ø 120 mm must be fitted and

connected to the outside by an extraction vent.

For recirculation mode close the air outlet

by putting on the cover (6).

Reinstall the grease filter grid or aluminum grease filter.

mat

mat mat

mat

for recirculation mode

for recirculation modefor recirculation mode

for recirculation mode

Remove the grease filter grid (3) including fleece filter. Loosen the moun

ing wires (1) that hold the fleece filter in position.

Insert the previously fitted carbon filter

mat (2) onto the fleece filter and

clamp the mounting wires in again.

Reinstall the grease filter grid

with fixed

fleece filter and carbon filter mat.

Remove the aluminum grease filter (1).

Insert the previously fitted carbon

filter mat parts onto the grease filter and

fix the mat parts each with two metal struts (2) (

supplied with

filter mat).

Reinstall the

aluminum grease filter with fixed carbon filter mats.

odours

and must be replaced at least every six months

The installation to the mains supply must conform to the local standards and regulations.

Improper connection may cause to an

electric shoc

electric shocelectric shoc

electric shock!

k!k!

plug

. If the plug does not fit properly to the outlet, let install a proper outlet by

The accessibility of the power plug must be ensured in order to disconnect the

appliance

must also create a feed through of approx. Ø 130 mm in the base of the unit.

Drill four mounting holes of Ø 4 mm through the base of the unit. Screw in the appliance with the

screws

including washers (3) under the wall unit and tighten the nuts (4) through the hood body.

) from above onto the air outlet.

with an inner diameter of Ø 120 mm must be fitted and

Remove the grease filter grid (3) including fleece filter. Loosen the moun

mat (2) onto the fleece filter and

fleece filter and carbon filter mat.

filter mat parts onto the grease filter and

supplied with

the carbon

aluminum grease filter with fixed carbon filter mats.

regardless of use.

The installation to the mains supply must conform to the local standards and regulations.

. If the plug does not fit properly to the outlet, let install a proper outlet by

appliance

from the power

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann DU 623.1 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info