Bedienungsanleitung Bomann DU 659 IX (Seite 19 von 28) (Deutsch, Englisch)

651977

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

NOTE

NOTENOTE

NOTE:

Recomm

RecommRecomm

Recommendations for p

endations for pendations for p

endations for p

reparation work

reparation workreparation work

reparation work

• When installing, ask another

person

•

Wear protective gloves to prevent injuries from any sharp edges.

•

Determine the position of the extractor hood centrally above the hob in conformance with the

safety distances.

•

Mark the necessary holes for the wall mounting by using the supplied drill template and

spirit level.

• Drill Ø 8 mm mounting holes into

fasten the brackets with the

screws

•

Attach the suspension rail (1) for the hood body as well as the mounting rail with bracket (2) to the top

edge

parallel to the rail (1) (Fig. A). Determine the extension length of the duct cover

• Before suspending

insert the non

them.

For extraction mode:

For extraction mode:For extraction mode:

For extraction mode:

• Hereupon a

flexible extraction hose

(Fig. B)

and connected to the outside by the extraction outlet.

• Hook the extractor hood into the

suspension

•

Remove the protective plastic from the telescopic duct.

• Fix the outer (lower) duct with

the mounting rail without the bracket (3). The rail is fastened to the holes

provided from the inside of the duct.

reparation work

reparation workreparation work

reparation work

person

to assist.

Wear protective gloves to prevent injuries from any sharp edges.

5 6

Determine the position of the extractor hood centrally above the hob in conformance with the

Mark the necessary holes for the wall mounting by using the supplied drill template and

the wall for the respective brackets (1+2+3).

Insert

screws

(6).

Attach the suspension rail (1) for the hood body as well as the mounting rail with bracket (2) to the top

parallel to the rail (1) (Fig. A). Determine the extension length of the duct cover

insert the non

return valves (4) onto the extractor duct from above by gently bending

flexible extraction hose

(not supplied)

with an inner diameter of Ø 150 mm must be attached

and connected to the outside by the extraction outlet.

suspension

rail (1) (Fig. C). Check that it is se

cure

Remove the protective plastic from the telescopic duct.

the mounting rail without the bracket (3). The rail is fastened to the holes

provided from the inside of the duct.

Screw in two plate screws (7

) from the back (Fig. D).

Determine the position of the extractor hood centrally above the hob in conformance with the

specified

Mark the necessary holes for the wall mounting by using the supplied drill template and

check them with a

Insert

the dowel pins (5) and

Attach the suspension rail (1) for the hood body as well as the mounting rail with bracket (2) to the top

parallel to the rail (1) (Fig. A). Determine the extension length of the duct cover

in advance!

return valves (4) onto the extractor duct from above by gently bending

with an inner diameter of Ø 150 mm must be attached

cure

and horizontally level.

the mounting rail without the bracket (3). The rail is fastened to the holes

) from the back (Fig. D).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann DU 659 IX Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info