Bedienungsanleitung Bomann DU 7601 G (Seite 19 von 28) (Deutsch, Englisch)

687864

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

• Determine the position of the cooker hood central-

ly above the cooking area in accordance with the

specified safety distances.

Totally 6x mounting holes with a diameter of approx.

8 mm are necessary for the wall mounting. Insert the

supplied dowels

(Fig. 1).

(Fig. 1).(Fig. 1).

(Fig. 1).

• First mark the holes required for fixing the hood

body in accordance with the supplied drilling tem-

plate. Check the markings with a water balance

and make the holes.

- Turn in the upper screws 2x ST4*30mm for the

suspension of the hood body so far that they

project approx. 5 mm out of the wall.

• Fasten the bracket for the upper shaft termination

with the screws 2x ST4*40mm after determining

the extension length of the shaft cover.

• Before attaching the hood

(Fig.

(Fig.(Fig.

(Fig.

2)2)

- Fasten the glass screen with the screws

4x M4*20mm in the screw insert made of rub-

ber together with washers on the hood body.

- Affix the connecting piece with inserted non-

return valves from the top of the extraction

duct with the screws 2x ST4*8mm.

Insert the two non-return valves by lightly

bending them from above into the connecting

piece

(Fig. 2a)

(Fig. 2a)(Fig. 2a)

(Fig. 2a)

For the exhaust

For the exhaust For the exhaust

For the exhaust hose:

hose: hose:

hose:

Hereupon a flexible exhaust

hose (supplied) with an inner diameter of 150 mm

must be attached. Secure the hose with the cable tie.

• Hang up the hood. Check the secure hold and the

horizontal position. Tighten the lower screws 2x

ST4*30mm through the hood body to secure the

hood

(Fig. 3)

(Fig. 3)(Fig. 3)

(Fig. 3)

For the exhaust hose:

For the exhaust hose: For the exhaust hose:

For the exhaust hose:

Check the correct position of

the exhaust hose and connect it with the outlet open-

ing.

• Fit the telescoping shaft unit. Pull up the inner

shaft and fix the shaft cover to the side of the

bracket using the self-tapping screws 2x

ST4*8mm

(Fig. 4

(Fig. 4(Fig. 4

(Fig. 4)

))

)

Installing the activated carbon

Installing the activated carbonInstalling the activated carbon

Installing the activated carbon

filter for recirculation

filter for recirculation filter for recirculation

filter for recirculation

mode

modemode

mode

• Remove the aluminum grease filter (see “Clean-

ing the aluminum grease filter).

• Place the carbon filter onto the intake of the ex-

haust air duct. Make sure that the fixing pins of

the carbon filter engage in the fastening slots of

the exhaust air duct. Put the filter in A

A A

A and press

firmly flat B

• Reinstall the aluminum grease filter.

Electrical connection

Electrical connectionElectrical connection

Electrical connection

WARNING:

WARNING:WARNING:

WARNING:

• The installation to the mains supply must conform

to the local standards and regulations.

• Improper connection may cause to an electric

electric electric

electric

shock

shockshock

shock!

• Do not modify the appliance plug. If the plug does

not fit properly to the outlet, let install a proper

outlet by an authorized specialist.

• The accessibility of the power plug must be en-

sured to disconnect the appliance from the power

supply in case of emergency.

• Ensure that your mains power corresponds with

the specifications of the appliance. The specifica-

tions are printed on the rating label.

• Connect the mains cable to a properly installed

and earthed wall outlet.

• If the plug after installation is not accessible, a

corresponding disconnect device must be availa-

ble to meet the relevant safety regulations.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann DU 7601 G Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info