Bedienungsanleitung Bomann EBK 959 (Seite 20 von 24) (Deutsch, Englisch)

552036

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

2020

Troubleshooting

The design of the appliance ensures a trouble-free operation and a long lifetime.

If a malfunction stills occurs, then check if these may be the result of an operating error.

Error Possible cause Remedy

The cooking hob cannot be turned on. The power supply has been interrupted. - Check the circuit breaker of the appliance.

- Using another electrical appliance, check

whether there is a problem with the power

supply.

The buttons are no longer reacting. The child lock is active. - Unlock the control panel.

The buttons react very poorly during

contact.

Thebuttonsurfaceisdamp.Youaretouchingthebut-

tonsurfacewithyourngertips.

- Ensure that the area of the button is dry and

- thatyouusethetipofyourngerforthe

operation.

The glass surface is scratched. Youareusingrough,unevencookwareand/oranag-

gressive abrasive cleaner or sharp metal utensils.

- Only use cookware with an even bottom,

see

Selectiing the right cookware.

- See

Cleaning

A quiet humming is heard when a high

power setting is selected.

That is caused by the induction technology. This does not refer to any error.

The noise should disappear as soon as the

power setting has been reduced.

Ventilation noises can be heard. Theappliancehasaltertopreventoverheatingofthe

electronics. The fan will still continue to run for a few

seconds after the appliance has been shut off.

This does not refer to any error. Do not

switch off the power supply while the fan is

running.

Cookwaredoesn’tgethot. The appliance cannot recognize the cookware. The

cookware is not suitable for induction, is too small for

the cooking zone or is not centered on the cooking

zone.

- Use cookware suitable for induction, see

Selecting the right cookware.

- Ensurethatthecookwaretsontothecook-

ing zone and that it is centered.

NOTE:

Should you still have problems with your device after following the steps above, please contact your distributor or an authorized specialist.

In the case of a malfunction, the induction hob will automatically go into safety mode and the respective error code will be shown:

Error Code Possible Cause Remedy

F0 Fan has failed. Consult specialist company.

F3-F8 Power unit has failed. Restart the stovetop after the temperature returns to normal.

Contact a specialist company if necessary.

F9-FE Temperature sensor IGBT has failed. Restart the stovetop after the temperature returns to normal.

Contact a specialized company if necessary.

E1/E2 Problem with power supply. Make sure that your supply voltage is ok.

Contact specialized company if necessary.

E3/E4 Overheating. Check the pot.

Restart the stovetop after the temperature returns to normal.

Contact a specialized company if necessary.

E5/E6 Bad heat dissipation. Restart the stovetop after the temperature returns to normal.

Contact a specialized company if necessary.

Technical Data

Model: ............................................................................................................................................................................................................................EBK 959

Power supply: .................................................................................................................................................................... 220-240 V~ / 400 V 3 N~, 50/60 Hz

Power consumption: ..............................................................................................................................................................................6400-7200 W / 7000 W

Protection class: .......................................................................................................................................................................................................................... I

UnitsizeHxLxW: .....................................................................................................................................................................................6.0x59.0x52.0cm

Built-insizeLxW: ...............................................................................................................................................................................................56.0x49.0cm

Net weight: ...........................................................................................................................................................................................................approx.10.0kg

Therighttomaketechnicalanddesignmodicationsinthecourseofcontinuousproductdevelopmentremainsreserved.

This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has

been constructed in accordance with the latest safety regulations.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann EBK 959 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info