Bedienungsanleitung Bomann EK 6020 (Seite 22 von 58) (Deutsch, Englisch, Französisch, Spanisch, Polnisch)

687999

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

EK6020CB_IM 02.08.18

The Timer

The appliance including heating can be time-controlled via

the timer. Prerequisite for the correct operation of the timer

is the setting of the current time and day of the week.

• You can set a maximum of 23 hours and 50 minutes in

advance.

• The time setting is done in 10-minute increments.

• You may program up to 10 different timer settings.

• Each timer setting includes its own switch-on time,

switch-off time and temperature setting.

• A setting can be programmed for any day of the week or

for several days.

• If you want, you may only program a switch-off time dur-

ing operation and ignore the entry of the switch-on time.

If the switch-off time is meant to be the next day, remem-

ber to adjust the day of the week when programming.

• Even if the appliance is disconnected from the mains,

the timer settings will be preserved.

Display Timer Settings

1. Press the TIMER SET button. The number for the rst

setting ashes in the display and “ON” lights up.

2. Press the

or button to display the switch-on times of

the 10 timer settings.

3. Press the button in order to switch to the switch-off

time. “OFF” will appear on the display.

4. Use the or button to display the switch-off times.

5. To clear a displayed setting, press the C button.

Programming the Timer

NOTE:

If you have accidentally made a wrong selection during

timer programming, exit the menu by pressing the OK

button and start again.

1. Select setting number

1) Press the TIMER SET button. The display of the

timer setting number starts ashing.

2) Use the

or button to select another setting

number.

3) Press the TIMER SET button again to conrm the

selection.

2. Weekday(s) selection

1) The arrow

and a weekday will be ashing. Use the

or button to select a weekday.

2) Press the button to activate the weekday. The

arrow beside the weekday is ashing.

3) Press the TIMER SET button to conrm the selection.

4) If you want to deactivate a weekday, press the

button, while the arrow beside the weekday is

ashing.

3. Setting the start time

(“ON” will light up in the display)

1) The hour display starts ashing.

Use the

or button to set the hour.

2) Press the TIMER SET button to conrm the selection.

3) The minute display starts ashing.

Use the or button to set the minute.

4) Press the TIMER SET button to conrm the selection.

4. Setting the switch-off time

(“OFF” will light up in the display)

1) The hour display starts ashing.

Use the

or button to set the hour.

2) Press the TIMER SET button to conrm the selection.

3) The minute display starts ashing.

Use the or button to set the minute.

4) Press the TIMER SET button to conrm the selection.

5. Setting the base temperature for the heating

NOTE:

For technical reasons, the current weekday is dis-

played again in this menu item.

1) The temperature display starts ashing. Use the

button to set the base temperature for the heater.

2) Press the TIMER SET button to conrm the selection.

Activating / Deactivating the Timer

IMPORTANT NOTE:

• In the event of a power failure, all timer settings will be

preserved. However, the appliance will be reset to the

basic settings.

• For safety reasons, the heating will be switched off.

WARNING: Fire hazard!

• Before switching on the timer, check the settings of

the current weekday, the current time and the timer

settings.

• Always set the start time in such a way that the appli-

ance is under proper supervision during operation.

1. Use the 900 W or 1800 W buttons

to set the desired heat-

ing power. Alternatively, you may also use the IC button

to select the adaptive start control function of the heater.

2. Use the DIMMER button to set the intensity of the

ames you wish to have at the start time.

3. By using the TIMER ON / OFF button you switch the

timer on or off.

NOTE:

• If the timer is activated, the

symbol will appear in

the display.

• In addition, the display will show the symbols for the

intensity of the ames and for the heating, provided

this it has been switched on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann EK 6020 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info