Bedienungsanleitung Bomann EK 6021 (Seite 21 von 58) (Deutsch, Englisch, Französisch, Spanisch, Polnisch)

688000

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

EK6021CB_IM 02.08.18

Operation

CAUTION:

Do not switch on the appliance until it has been properly

installed!

NOTE:

• The operation can partly be done via the control panel

of the appliance.

• To set the timer programming, use the remote control.

• Each operating step will be acknowledged by a signal

tone.

• When pressing a wrong button, you will hear two short

beeps.

• After switching on the appliance, the display behind the

glass front becomes visible. For a better ambience, the

display will switch off approx. 20 seconds after each

operation. Press any button to reveal the display again.

Switching on the Appliance

Set the power switch to position I. The appliance is in

Standby. The

symbol lights up in the display.

Basic Setting of the Appliance

After switching on the appliance via the power switch, it will

be in the following basic setting:

- Weekday = SUN (Sunday)

- Display of the current room temperature

- Time =

- Intensity of the ames = high

- Lighting BACKLIGHT = off

- Base temperature for heating =

- Heating = off

- Timer = off

NOTE:

• Even in the event of a power failure, the appliance is

reset to this basic setting.

• For safety reasons, the appliance will always start

without heating.

Close Operation of the Appliance

• You can switch on the appliance on the control panel by

briey pressing the I / O button. The basic setting of the

appliance will become visible in the display.

• If you want to change the intensity of the ames, press

the I / O button for more than 3 seconds.

• You may turn on the lighting by pressing the BACKLIGHT

button. Pressing this button repeatedly, will change the

colours. There are 7 different colour variants.

• Press the POWER button once to activate the heating

power for 900 W. Press the POWER button a second

time to activate the heating power for 1800 W. Pressing

the button a third time will switch off the heating.

The control lamps above the button are displaying the

corresponding status.

NOTE:

The heater and the fan will not be switched on by the

appliance until the room temperature is lower than the

base temperature for the heater (see basic setting).

You can increase the base temperature for the heating

via the remote control.

Operate of the Appliance from the Distance

1. Switch the appliance on by pressing the ON / OFF button

on the remote control. The basic setting of the appliance

will become visible in the display.

2. Press the or button to set the base temperature for

the heater. Possible temperature range: Between 15 °C

and 30 °C. Note that the base temperature must be

higher than the current room temperature. If the room

temperature falls below the set base temperature, the

heating will switch on automatically.

3. Use the button 900 W / 1800 W to select the heating

power:

Button

Appearance

in the display

Heating power

Press 1 ×

900 W

Press 2 ×

1800 W

Press 3 × off

4. If you want to use the heater’s adaptive start control

function, press the IC button. “AUTO” will appear on the

display. Based on the room temperature and the set

temperature the appliance will automatically adjust the

heating power.

5. Press the BACK-LIGHT button to select one of 7 colour

variants.

6. Press the DIMMER button if you want to change the

intensity of the ames.

Setting the Current Day of the Week and the Time

1. Press the DATE / TIME button. The arrow

and a

weekday will be ashing. Use the or button to

select a weekday. Press the DATE / TIME button again

to conrm the weekday.

2. The hour display starts ashing. Use the

or button

to set the current hour. Press the DATE / TIME button

again to conrm the hour.

3. The minute display starts ashing. Use the or

button to set the current minute.

4. Press the OK button to exit the menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann EK 6021 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info