Bedienungsanleitung Bomann GS 2186 (Seite 15 von 24) (Englisch)

688043

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

• Use the provided collection points of electrical equipment for the dis-

posal of the appliance.

Coolant

CoolantCoolant

Coolant

WAR

WARWAR

WARNING

NINGNING

NING:

The coolant circuit of this appliance contains the

refrigerant Isobutane (R600a), a natural gas that is

flammable and of high environmental compatibility.

Make sure no parts of the coolant circuit get dam-

aged during transport and installation of the appli-

ance.

If the coolant circuit is damaged:

If the coolant circuit is damaged:If the coolant circuit is damaged:

If the coolant circuit is damaged:

• avoid any open flames or ignition source,

• disconnect the plug,

• thoroughly air the room in which the appliance is

installed and

• contact an authorized technician.

Transport

Transport Transport

Transport and Packaging

and Packagingand Packaging

and Packaging

Transport the appliance

Transport the applianceTransport the appliance

Transport the appliance

Transport the appliance, if possible, only in vertical

position. Otherwise, it is absolutely necessary to

allow the appliance standing upright for a few hours

before installation ”Prior to first use”. Protect the ap-

pliance during transport against weather influences.

Unpack the appliance

Unpack the appliance Unpack the appliance

Unpack the appliance

• Remove the appliance from its packaging.

• Remove all packaging material, such as foils, filler

and cardboard packaging.

• To prevent hazards, check the appliance for any

transport damage.

• In case of damage, do not put the appliance into

operation. Contact your distributor.

CAUTION: Transport protection!

CAUTION: Transport protection!CAUTION: Transport protection!

CAUTION: Transport protection!

Pull off the foil from the appliance sides.

NOTE

NOTENOTE

NOTE:

Production residue or dust may have collected on the

appliance. We recommend cleaning the appliance

according to chapter “Cleaning and Maintenance”.

Appliance

Appliance Appliance

Appliance Equipment

EquipmentEquipment

Equipment

Appliance overview

Appliance overviewAppliance overview

Appliance overview

Temperature control 3

Freezing drawers

Appliance door 4

Adjustable feet

Delivery scope

Delivery scopeDelivery scope

Delivery scope

3 x freezing drawer, 1 x ice-cube tray, 1 x door han-

dle incl. fixing screws with covers

Installation

InstallationInstallation

Installation

Condition

ConditionCondition

Conditions for the installation location

s for the installation locations for the installation location

s for the installation location

• Good ventilation is required around the appliance,

in order to dissipate the heat properly and to

guarantee efficient cooling operation at low power

consumption. Sufficient clearance is necessary.

- Gap to the back and to the side walls each

approx. 5 cm;

- Place the appliance so that the appliance door

can open without being impeded.

• Only install at a location with an ambient tempera-

ture suitable for the climate class of the appliance.

For information on the climate class, please refer

to chapter “Technical Data” or to the rating label

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann GS 2186 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info