It is recommend that you run a was h cycle with the
dishwasher empt y and the n remove the plug from the
socket, turn off the water supp ly and leave the door of
the appliance slightly open. This will help the door
seals to l ast longer and prevent odours from forming
within the appliance.
If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
One of the factors that cause odours to form in the
dishwasher is food th at remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
After every wash, turn off the water supply to the
appliance and leave the door slightly open so that
moisture and odours are not trapped inside.
Before cleaning or performing maintenance, always
remove the plug from the socket.
To clean the exterior and rubber parts of the di shw asher,
do not use solvents or abrasive cle aning products.
Only use a cloth with warm so apy water.
To remove spots or stains from the surface of the
interior, use a cloth dampened with water an a little
vinegar, o r a cleaning pro duct mad e specifically for
dishwashers.
After Every Wash
Remove the Plug
No Solvents or Abrasive Cleaning
Moving the Appliance
Seals
When not in Use for a LongTime
The installation of the pipes
and electrical equipments
should be done by professionals.
Electrical Shock Hazard
Disconnect electrical power
before
installing dishwasher.
Failure to do so can result in
death or electrical shock.
The installation position of dishwasher should be near the existing in let and drain hoses and
power cord.
One side of the ca binet sink should be chosen to facilitate the connection of drain hoses of
the dishwasher.
Installation preparation
Note: please check the accompanying installation accessories(hook for aesthetic panel,screw)
ʎ
