Tension adjustment
of the door spring
ʧ ʨFigure5
Tension adjustment of the door spring
ʎ
Connection of drain hoses
ʎ
The door springs are set at the factory to the proper tension for the outer door. If aesthetic
panel are installed, you will have to adjust the door spring tension. Rotate
the adjusting screw to drive the adjustor to strain or relax the steel cable(see figure 5).
Door spring tension is correct when
the door remains horizontal in the
fully opened position yet rises
to a close with the slight lift of a
finger.
⩖
relax
PLEASE HANG UP THE DRAIN HOSE EITHER WAY OF A, B, C
Ĩ
40mm
A
B
C
Counter
Front
Drain pipe
Drain hose hook
Close the drain hose hook to the counter
Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it run into the sink, making sure to
avoid bending or crimping it. Use the special plastic support that comes with the appliance . The top of the hose
must be at a heig ht between 40 and 100cm. The free end of the hose must not be immersed in water to avoid the
back flow of it.
