Bedienungsanleitung Bomann GSPE 879 (Seite 20 von 24) (Englisch)

652040

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Problem

ProblemProblem

Problem

Possible causes

Possible causesPossible causes

Possible causes

What do to

What do toWhat do to

What do to

Spots and filming on

glasses and flatware

Extremely hard water

Low inlet temperature

Overloading the baskets

Improper loading

Old or damp detergent

Empty rinse dispenser

Incorrect dosage of deter-

gent

To remove spots of glassware:

- Take out all metal utensils of the appliance.

- Do not add detergent.

- Select a longer rinse cycle.

- Start the dishwasher and allow it to run for about

15 minutes up to the main rinse.

- Pour 2 cups of white vinegar into the appliance bottom.

- Let complete the rinse cycle. If the vinegar does not work:

repeat as above, except use ¼ cup (60 ml) of citric acid

crystals instead of vinegar.

Cloudiness on

glassware

Combination of soft water

and too much detergent

Use less detergent if you have soft water and select a short-

est cycle to rinse glassware and to get clean.

Yellow or brown film on

inside surface

Tea or coffee stains Using a solution of ½ cup of bleach and 3 cups of warm wa-

ter to remove the stains by hand.

Iron deposits in water can

cause an overall film

Call a water softener company for a special filter.

White film on inside

surface

Hard water minerals To clean the interior, use a damp sponge with dishwasher

detergent. Wear rubber gloves.

Detergent dispenser

close not properly

Clogged detergent residue

is blocking the catch

Clean the detergent from the catch.

Detergent left in dis-

penser

Dishes blocks the dispenser

Reload the dishes.

Steam Normal There is some steam coming through the vent by the door

latch during drying and water draining.

Black or grey marks on

dishware

Aluminum utensils have

rubbed against dishware

Use a mild abrasive cleaner to eliminate those marks.

Water standing on the

bottom of the tub

Normal A small amount of clean water around the outlet on the tub

bottom keeps the water seal lubricated.

Dishwasher leaks Overfill dispenser or rinse

aid spills

Do not overfill the dispenser. Spilled rinse aid could cause

oversudsing and lead to overflowing.

Error

Error Error

Error codes

codescodes

codes

With some malfunctions the appliance displays the following error codes to warn you:

Display

DisplayDisplay

Display-

-indication

indicationindication

indication

Meaning

MeaningMeaning

Meaning

Possible causes

Possible causesPossible causes

Possible causes

E1E1

Water supply Water inlet malfunction.

E4E4

Overflow / water leackage Possible overflow / leakage occurs.

CAUTION

CAUTIONCAUTION

CAUTION:

• If overflow occurs, turn off the main water supply before calling an authorized technician.

• If there is water in the lower housing part due to an overfilling or a small leak, remove this water before

restarting the appliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann GSPE 879 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bomann GSPE 879

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info