Bedienungsanleitung Bomann GSPE 890 (Seite 8 von 20) (Englisch)

687836

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Connect the water inlet hose (cold water connection)

Connect the water inlet hose (cold water connection)Connect the water inlet hose (cold water connection)

Connect the water inlet hose (cold water connection)

NOTE

NOTENOTE

NOTE:

The water pressure must be between 0.04-1.0 MPa.

With higher pressure: use a pressure regulator.

• Connect the water inlet hose to a

water thread with ¾“. Screw the

hose firmly in the direction of the

screw thread; pay attention for a

tight fit.

• Connect the other end of the inlet

hose to the inlet valve on the ap-

pliance back; pay attention for a

tight fit too.

Connect the water drain hose

Connect the water drain hoseConnect the water drain hose

Connect the water drain hose

NOTE

NOTENOTE

NOTE:

The drain hose has a length of approx. 1.5 m and

can extend with a suitable hose and connecting

piece to a length of max. 4 m.

CAUTION:

CAUTION:CAUTION:

CAUTION:

In order to prevent backflow of contaminated water,

the free end of the hose must not come under the

water level of the drain.

• Connect the drain hose to a

drain pipe (B) with a mini-

mum diameter of 40 mm;

alternatively the drain hose

can be fixed directly to the

sink (A).

• Always make sure that the hose is not bent or

squeezed.

• It is allowed to install the hose maximal up to a

height of 1000 mm above the rinsing floor.

• Secure the drain hose securely to avoid a change

in position and with it a water leakage.

Electrical connection

Electrical connectionElectrical connection

Electrical connection

WARNING:

WARNING:WARNING:

WARNING:

• The installation to the mains supply must conform

to the local standards and regulations.

• Improper connection may cause to an electric

electric electric

electric

shock

shockshock

shock!

• Do not use multiple sockets or extension cords.

• It is not allowed to modify the plug provided with

the appliance! If the plug does not fit properly to

the outlet, let install a proper outlet by an author-

ized specialist.

• The accessibility of the power plug must always

be ensured in order to disconnect the device from

the power supply in case of an emergency.

• Make sure that the voltage supply matches the

specifications on the rating label (door frame) be-

fore connecting.

• Connect the mains cable to a properly installed

and earthed wall outlet.

• If the plug after installation is not accessible, a

corresponding disconnect device must be availa-

ble to meet the relevant safety regulations.

Prior Using for the first Time

Prior Using for the first TimePrior Using for the first Time

Prior Using for the first Time

Before using your dishwasher for the first time:

Before using your dishwasher for the first time:Before using your dishwasher for the first time:

Before using your dishwasher for the first time:

A. Filling salt into the salt container (water softener)

B. Fill the rinse aid dispenser

C. Fill in detergent

CAUTION:

CAUTION:CAUTION:

CAUTION:

• Use only salt, rinse aid and detergent for dish-

washers. Other products may damage the appli-

ance.

• Always consider the dosage and storage recom-

mendations on the sales packaging.

WARNING:

WARNING:WARNING:

WARNING:

Keep salt, rinse aid and detergent out of reach for

children.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann GSPE 890 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bomann GSPE 890

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info