Bedienungsanleitung Bomann GSPE 892 (Seite 16 von 20) (Englisch)

687847

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

• Drain the water from the inlet hose and the water

valve.

• Reconnect the inlet hose to the water valve.

• Turn off the lid of the salt container and take off

the filter system. Remove the remaining water in

the sump with an absorbent sponge.

TrTr

Troubleshooting

oubleshootingoubleshooting

oubleshooting

Before you contact an authorized specialist

Before you contact an authorized specialistBefore you contact an authorized specialist

Before you contact an authorized specialist

Problem

ProblemProblem

Problem

Possible cause / Action

Possible cause / ActionPossible cause / Action

Possible cause / Action

Appliance is

not working

/ starting

∙ Check the power supply. ∙ Is the appliance

turned on and the door securely closed?

∙ Is a program selected? ∙ Is the water supply

properly connected and the water supply

opened?

Water is not

drained off

∙ Check the drain hose.

∙ Are the filters or the kitchen sink clogged?

Noises ∙ A clicking sound on opening of the deter-

gent container is normal. ∙ Make sure that all

dishes are secured in the dishwasher.

∙ Place the parts so that the spray arms can

rotate freely.

Foaming ∙ Use only special dishwasher detergent to

avoid foaming. If this occurs, open the door

and let suds evaporate. Add approx. 4 liter

cold water to the tub. Start a short rinse cycle

to drain out the water. ∙ Always wipe up

spilled rinse aid immediately.

Flat table-

ware are

not clean

∙ Select a stronger program.

∙ Make sure that the action of the detergent

dispenser and spray arm is not blocked by

large dishes.

Spots and

filming

∙ Extremely hard water ∙ low inlet temperature

∙ overloading the baskets, improper loading

∙ old or damp detergent ∙ empty rinse dis-

penser ∙ incorrect dosage of detergent

Cloudiness

glassware

Use less detergent if you have soft water and

select a shortest cycle to rinse and clean

glassware.

Black or

grey marks

Aluminum utensils have rubbed against dish-

ware. Use a mild abrasive cleaner to elimi-

nate those marks.

Problem

ProblemProblem

Problem

Possible cause / Action

Possible cause / ActionPossible cause / Action

Possible cause / Action

Stains on

inner sur-

face

Only use detergents without colorants.

Yellow or

brown film

on inside

surface

∙ Tea or coffee stains: Using a solution of ½

cup of bleach and 3 cups of warm water to

remove the stains by hand. ∙ Iron deposits in

water can cause an overall film. Call a water

softener company for a special filter.

White film

on inside

surface

Hard water minerals: clean the interior by

using a damp sponge with dishwasher deter-

gent. Wear rubber gloves.

Dispenser

doesn’t

properly

Clogged detergent residue is blocking the

catch. Clean the catch.

Detergent

left in dis-

penser

Improper loaded dish is blocking the dis-

penser.

Unsatisfac-

tory drying

result

∙ Improper loading ∙ too less rinse aid

∙ dishes are removed too soon ∙ wrong pro-

gram has been selected ∙ use of cutlery with

a low-quality coating

Error codes

Error codesError codes

Error codes

For some malfunctions, the device displays the

following error codes to warn you:

Control lamps

ontrol lampsontrol lamps

ontrol lamps

flas

flasflas

flashes

heshes

hes

Meaning / possible cause

Meaning / possible causeMeaning / possible cause

Meaning / possible cause

Rapid

Water inlet fault! Faucet not open, inlet

blocked or water pressure too low.

ECO

ECOECO

ECO

Eco Overflow / water leakage!

CAUTION:

CAUTION:CAUTION:

CAUTION:

• If overflow occurs, turn off the main water supply

before calling an authorized technician.

• If there is water in the lower housing part due to

an overfilling or a small leak, remove this water

before restarting the appliance.

NOTE:

NOTE:NOTE:

NOTE:

If a problem still persists after following the steps

above, please contact your distributor or an author-

ized technician.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann GSPE 892 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bomann GSPE 892

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info