Bedienungsanleitung Bomann GT 7338 (Seite 24 von 28) (Deutsch, Englisch)

814344

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

NOTE:

To speed up the defrosting process, make use of the

included ice scraper.

To achieve better cooling and to save energy, defrost

the appliance regularly as follows:

• To start the defrosting process, disconnect the ap-

pliance from the power supply.

• Remove the appliance content and keep covered

at a cool location.

• Open the water discharge channel at the appli-

ance bottom and the water discharge opening at

the appliance front. Place a drip tray under to

catch leaking water.

• When the ice has melted, wipe the condensate

away and dry the appliance interior.

• Then you may restart the appliance by connecting

the plug and turning the temperature control.

Replacing the lid hinge

If the appliance lid does not stay up after opening,

this is probably due to a worn or damaged hinge.

It is recommended to replace all hinges at the same

time, otherwise the next repair will soon be beckon-

ing.

• If necessary, remove the contents of the appli-

ance and the interior fittings.

• Carefully remove both hinge cover caps and dis-

assemble the hinge with the lid in the open posi-

tion.

First loosen the screws at-

tached to the lid and then the

screws attached to the rear

wall.

• The hinges are mounted in reverse order.

• Open the appliance lid for a test run, readjust the

hinges if necessary. In any case, make sure that

the lid fits tightly and accurately.

Troubleshooting

Before you contact an authorized specialist

Problem / Cause / Action

Appliance is not working properly or at all

- Check the power supply / temperature setting /

ambient temperature.

- Unblock the ventilation openings, install the ap-

pliance freely.

Loading is too warm

- Check the temperature setting / ambient temper-

ature.

- A large quantity of warm food has been stored in

the appliance in the last 24 hours.

- The appliance lid is not closed properly, check

the lid seal.

Loud noise during operation

- Check that the appliance is level.

See

"Operating noise"

Water on the appliance bottom

Check the temperature setting / water discharge

channel or opening.

NOTE:

If a problem persists after following the steps above,

contact your trader or an authorized technician.

Technical Data

Climate class N/ST: this appliance is intended to be

used at ambient temperature ranging from 16°C to

38°C.

Electrical connection………………...…………………..

Power voltage: ……………….......220-240 V~ / 50 Hz

Rated (defrost) power: ……………….....………150 W

Rated current: ………………..............…..……....1.5 A

Dimension H x W x D / Weight…..…...………………..

Appliance size: ……..…...…......85.0 x 90.5 x 55.0 cm

Net weight: ……………………….……approx. 31.0 kg

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann GT 7338 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info