Bedienungsanleitung Bomann KB 7235 (Seite 19 von 24) (Deutsch, Englisch)

754673

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Operating noise

Type of sound Cause

Mumbling Compressor during its operation

Liquid sounds Circulation of the refrigerant

Click sounds The temperature control turns the

compressor on or off

Disturbing

noises

Vibration of the shelves or cool-

ing coils

Switching off

To switch off the appliance turn the temperature con-

trol to the off state.

If the appliance is out of use for long periods:

 Remove the appliance content.

 Disconnect the appliance from the power supply.

 Defrost (model dependent) and clean the device

thoroughly (see ”Cleaning and Maintenance”).

 Leave open the appliance door to avoid formation

of mold and unpleased odors.

Tips for Energy saving

 Disconnect the appliance from the power supply,

if it isn’t in use.

 Do not install the appliance near stoves, heaters

or other heat sources. In case of higher ambient

temperatures, the compressor will run more fre-

quently and longer.

 Ensure enough ventilation at the bottom and rear

side. Never block ventilation openings.

 Place all shelves, racks or drawers (depending on

the model) in their original position.

 Adjust the temperature not colder than necessary.

 Allow warm food to cool before placing it in the

appliance.

 Open the unit door only as necessary.

 Defrost the unit regularly (model dependent).

 The seal of the appliance door must be complete-

ly intact, so that the door closes properly.

Cleaning and Maintenance

WARNING:

 Always disconnect the appliance from the power

supply before cleaning and user maintenance.

 Do not use steam cleaners for cleaning the appli-

ance; moisture could enter electrical components.

Risk of electric shock! Hot steam could damage

the plastic parts.

 The unit must be dry before restarting operation.

CAUTION:

 Do not use a wire brush or other sharp, abrasive

items.

 Do not use any acidic or abrasive detergents.

 Do not damage the refrigerant circuit.

Cleaning the appliance including interior

 Clean the appliance interior, the exterior surfaces,

the accessories and the door seal regularly with

warm water and mild detergent; or with a clean,

damp microfiber cloth without cleaning agent.

 Remove the appliance content and storage it at a

cool location.

 Clean the thaw water discharge channel / opening

carefully e.g. with a pipe cleaner.

 After everything was thoroughly dried, you can

restart the operation.

Defrosting

CAUTION:

Never use metal objects (e.g. knifes) to remove ice

from the evaporator. Otherwise it can be damaged.

The device has an automatic defrosting system. Dur-

ing defrosting water drops drains off at the back of

the cooling chamber. The thaw water running

through a channel, is collected in a drip tray located

on the compressor, where it will evaporate. Make

sure the water discharge opening does not get

clogged. A light formation of ice on the interior back

during operation is normal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann KB 7235 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info