688053
28
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
28
(3) Disassemble the upper door
hinge; lift out the upper unit door.
(4) + (5) Move the blind cover, after
changing the positions of the blind
plug and the hinge pin holder on the
top of the door.
(6) Release the doorstop (c) and
fasten the doorstop (d)* on the
underside of the door. Set the door
safely aside.
(7) Disassemble the middle door
hinge; lift out the lower unit door.
(8) Change the positions of the blind
plug and the hinge pin holder on the
top of the door.
(9) Move the doorstop on the
underside of the door. Set the door
safely aside.
(10) Move the blind cap and plugs on
the exposed holes of the middle door
hinge.
(11) Tilt the unit slightly backwards
and lock it in this position. Unscrew
the feet and disassemble the lower
door hinge.
(12) + (13) Transfer and fasten the
lower door hinge to the opposite
appliance side; after moving the pin to
limit the door opening into the
exposed hole. Screw in the feet.
Put the appliance back in the upright
position. Put on the lower door and fix
it in its intended position.
(14) Turn the middle door hinge about
180°, transfer and fasten it to the
opposite appliance side.
Put on the upper appliance door and
fix in its intended position.
(15) + (16) Transfer and fasten the
upper door hinge to the opposite
appliance side after unscrewing the
hinge pin and replacing it from the
other hinge side.
(17) Replace the appliance cover,
fasten it and put on the cover caps.
Check that the doors are aligned
vertically and horizontally to ensure
proper opening and closing of the doors.
Startup / Operation
Startup / OperationStartup / Operation
Startup / Operation
Prior to first use
Prior to first usePrior to first use
Prior to first use
CAUTION:
CAUTION:CAUTION:
CAUTION:
After transport, the appliance should be
left standing upright for 24 hours before
connecting to the power supply. Nonob-
servance could lead to malfunction of the
cooling system and causes an appliance
breakdown.
Clean the appliance interior including all
accessory parts. Consider the instruc-
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

bomann-kg-7302

Suche zurücksetzen

  • wie kann ich themperatur im gefrierteil höher stellen. seit aufstellung am20.04.2020 nur 10 grad minus Eingereicht am 6-5-2020 16:55

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bomann KG 7302 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info