Bedienungsanleitung Bomann KSG 239 (Seite 15 von 20) (Deutsch)

688065

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

• In case of damage, do not put the appliance into

operation. Contact your distributor.

CAUTION: Transport protection!

CAUTION: Transport protection!CAUTION: Transport protection!

CAUTION: Transport protection!

Remove the Styrofoam part between appliance back

and condenser (metal grille).

NOTE

NOTENOTE

NOTE:

Production residue or dust may have collected on the

appliance. We recommend cleaning the appliance

according to chapter “Cleaning and Maintenance”.

Appliance Equipment

Appliance EquipmentAppliance Equipment

Appliance Equipment

Appliance overview

Appliance overviewAppliance overview

Appliance overview

1 On/Off switch

interior light

2 2

2 Temperature

control

3 Control indication

thermostat position

4 4

4 Control lamp

power supply

5 5

5 Interior light

6 6

6 Circulation fan

7 7

7 Grid shelves

8 Door lock

9 9

9 Condenser

10 10

10 Water collecting

tray

11 11

11 Compressor

Delivery scope

Delivery scopeDelivery scope

Delivery scope

5x Grid shelf, 2x key for door lock, 2x spacers

Installation

InstallationInstallation

Installation

Condition

ConditionCondition

Conditions for the installation location

s for the installation locations for the installation location

s for the installation location

• Good ventilation is required around the appliance,

in order to dissipate the heat properly and to

guarantee efficient cooling operation at low power

consumption. Sufficient clearance is necessary.

- Gap to the back and to the side walls each

approx. 10 cm by using the spacers;

- Place the appliance so that the appliance door

can open without being impeded.

• Only install at a location with an ambient tempera-

ture suitable for the climate class of the appliance.

For information on the climate class, please refer

to the “Product Data Sheet” or to the rating label

located in the interior or on the appliance rear.

• Place the appliance on a steady and safe surface.

If the appliance is not horizontally leveled, adjust

the feet accordingly.

• Avoid the installation:

Avoid the installation:Avoid the installation:

Avoid the installation:

- near heaters, next to a stove, direct sunlight or

any other heat sources;

- at locations with high humidity (e.g. outdoors,

bathroom), as metal parts would be suscepti-

ble to corrosion under such circumstances;

- near volatile or flammable materials (e.g. gas,

fuel, alcohol, paint, etc.), in rooms which may

have poor air circulation (e.g. garages).

- Do not expose the appliance any weather.

Fitting the spacers

Fitting the spacersFitting the spacers

Fitting the spacers

Insert the supplied spacers (1)

into the holder (2) on the back of

the unit.

Electrical connection

Electrical connectionElectrical connection

Electrical connection

WARNING:

WARNING:WARNING:

WARNING:

• The installation to the mains supply must conform

to the local standards and regulations.

• Improper connection may cause to an electric

electric electric

electric

shock

shockshock

shock!

• Do not modify the appliance plug. If the plug does

not fit properly to the outlet, let install a proper

outlet by an authorized specialist.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann KSG 239 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info