Bedienungsanleitung Bomann MWG 2211 (Seite 41 von 50) (Deutsch, Englisch, Französisch, Italienisch)

497221

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

ENGLISH

Information on Grilling and

Combined Operation

• As heat radiation is used during grilling and combined

operation, please use only heat-resistant tableware.

• When food is only being grilled, metal or aluminium

tableware may also be used -but not during combined or

microwave operation.

• Only the grill is suitable for COMBI operation.

• Do not place anything on top of the housing as this becomes

hot.

• Always leave the ventilation slits uncovered.

• Please use the grilling grid to move the food to be cooked

nearer to the heating element.

Suitable Microwave Tableware

• The ideal material for use in a microwave is transparent and

allows the microwave radiation to heat the food evenly.

• Round/oval dishes and plates are more suitable than rectan-

gular ones as the food in the corners may overcook.

CAUTION:

Danger of explosion from tightly sealed cookware.

• Open sealed containers before cooking or heating.

• Pierce plastic protective ﬁ lms several times with a fork.

• Microwaves are not able to penetrate metal, so that no metal

vessels or plates should be used.

CAUTION:

Do not use any paper dishes made of recycled material as

these may contain small amounts of metal, which may result

in sparks or ﬁ res.

The list below is intended to help you select suitable microwave

tableware:

Material

Suitable for

microwave grill combination*

Heat-resistant glass

vessel

yes yes yes

Non-heat-resistant

glass vessel

no no no

Heat-resistant ceramic

vessel/plate

yes yes yes

Plastic vessels suitable

for microwave use

yes no no

Kitchen roll yes no no

Metal tray no yes no

Grilling grid no yes yes

Aluminium foil and foil

containers

no yes no

*) Combination of microwave with grill.

Operation of the device

• Your selection by pressing buttons is conﬁ rmed by a signal

tone. If not, you did not press properly.

• Then an acoustic signal is heard when the rotary knob is

turned for the ﬁ rst time.

• If you set a program but do not press the QUICK START/

START button within 5 minutes, the setting will be canceled.

The display will then show the current time again.

• When the door is open, the lights in the oven are on. If the

door is not closed after 10 minutes, the lights turn off.

• When starting a program, the remaining operating time will

be displayed. The countdown runs.

• 5 signal tones will indicate the end of the program.

Initial Operation

• After removing all the accessories from inside the oven,

unpack them and place the sliding ring in the middle.

• Position the glass plate on the drive axle in such a way that

it locks into the dents of the drive shafts and is lying ﬂ at.

• Check the device for any visible damage, particularly in the

area of the door. If any damage is found, the machine must

not be used.

• In order to avoid interference to other machines when the

microwave oven is operated, do not place it in the direct

vicinity of other electronic devices.

• Remove any protective foils that may be adhered to the

housing.

• Insert the mains plug into a properly installed 230 V, 50 Hz

power socket.

CAUTION:

Do not remove any installed parts from inside the oven or from

inside the door!

ޥ NOTE:

If there are any oil or other residues from the manufacturing

process on the housing or heating element, smoke or odours

may initially be produced. This is normal and will not occur

after the oven has been used a few times.

The following procedure is strongly recommended:

• Turn the device to the grill function and allow it to run se-

veral times without any food inside (max. 5 minutes each

time).

• Please ensure sufﬁ cient ventilation.

Setting the clock

ޥ NOTE:

During the ﬁ rst setting a signal tone will sound and the display

will show “0:00”.

• Press the CLOCK/PRE-SET button. The “clock” symbol

lights up in the display. The ﬁ rst digit ﬂ ashing.

• Use the turning knob to set the desired hour.

• Press the CLOCK/PRE-SET button. The second digits will

be ﬂ ashing.

• Use the turning knob to set the desired minutes.

• Press the CLOCK/PRE-SET button again to activate the

new time. The delimiter symbol ”:” of the digital time will be

ﬂ ashing on the display. The “clock” symbol goes off.

05-MWG 2211 U CB.indd 4105-MWG 2211 U CB.indd 41 09.02.2010 14:15:07 Uhr09.02.2010 14:15:07 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann MWG 2211 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info