Bedienungsanleitung Bomann PW 1405 CB (Seite 33 von 54) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Norwegisch)

551928

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

ENGLISH

Your personal values are now saved in the selected

memory slot.

A total of 8 memory slots are available. It is therefore

possible to store not only your own personal values but

also those of your family members in seven additional

memory locations.

Determining your Weight, Body Fat and

Body Water Ratio

First save your personal data in a memory slot.

Note: The measurement can only be performed if you

are barefoot. If necessary, wipe the contact surfaces to

improve conduction of the electricity. Place each of your

bare feet on 2 of the 4 contact surfaces.

1. Press the switch-on button ˾ to switch the device on.

All segments appear brieﬂ y in the display (5); then the

“memory location” display (12) ﬂ ashes.

2. Use the ̆/̄ arrow keys to select a memory location.

3. Press the storage button ̈ to enter the body fat

measurement mode.

• The memory location and the height that has

been set appear in the display for a few seconds

before the display changes to “0.0”.

4. Place both your feet on the contact surfaces (4) of the

scales.

• At ﬁ rst your weight is shown in the display.

• Within a few seconds the scales calculate your

body fat and body water ratio automatically.

• The display then shows your body fat percentage

(“BF” symbol), followed by the body water percen-

tage (“BW” symbol).

• Then the LCD display alternates ﬁ ve times

between the values for the body fat and the body

water percentage before switching off automati-

cally.

Display and Error Messages

General

If an error message (Err) appears in the display please

wait until the scales switch off. Then switch them on

again to continue using them.

For a complete reset remove the battery for a moment

and then reconnect it.

Messages

Switching

All segments light up simultaneously. This is a check that

the displays are working correctly.

„-----“

The scales are not positio-

ned correctly or the weight

to be measured is too low.

Correct operation is not

possible. Place the scales

on a ﬂ at and solid surface.

„Err“

The scales are not

positioned correctly or

overloaded.

Place the scales on a ﬂ at

and solid surface.

Is the weight being measu-

red greater than 150kg?

„LO“

The battery charge is too low.

„Err-h“

The calculated body fat % ratio is above the upper limit of

the measurement range.

„Err-l“

The calculated body fat % ratio is below the lower limit of

the measurement range.

Usage and care tips

• Weigh yourself without any clothes or shoes on before

meals and always at the same hour of the day.

• The balance rounds off weight to the closest 100 g.

• If you weigh yourself twice and two different values

are given, it means that your weight is comprised

between both values.

• Do not immerse the balance in water: the electronic

components can be damaged.

• Remove the batterie if the balance is not to be used

for a long period of time.

• Handle the balance with care, as it is a precise

measuring instrument. Do not drop it or jump on it.

• Absolutely no need for maintenance.

• Do not load the appliance with more than 150 kg to

avoid damaging the device.

Cleaning

• Clean the device with a slightly moist cloth. Make sure

that no humidity or waters seeps into the device!

• Do not use abrasive detergents! These can damage

the casing of the device!

• Use a commercially sold detergent or soap for clea-

ning.

• Dry the device well after cleaning with a dry and soft

cloth.

This device has been tested according to all relevant cur-

rent CE guidelines, such as electromagnetic compatibility

and low voltage directives, and has been constructed in

accordance with the latest safety regulations.

Subject to technical changes without prior notice!

Guarantee

The device supplied by our Company is covered by a

24 month guarantee starting on the date of purchase

(receipt).

During the life of the guarantee any fault of the device or

its accessories *) ascribable to material or manufacturing

defects will be eliminated free of charge by repairing or, at

our discretion, by replacing it. The guarantee services do

not entail an extension of the life of the guarantee nor do

they give rise to any right to a new guarantee!

Proof of the guarantee is provided by the proof of

purchase. Without proof of purchase no free replacement

or repair will be carried out.

If you wish to make a claim under the guarantee please

return the entire machine in the original packaging to

your dealer together with the receipt.

*) Damage to accessories does not mean automatic free

replacement of the whole machine. In such cases please

contact our hotline. Broken glass or breakage of plastic

parts are always subject to a charge.

Defects to consumables or parts subject to wearing

(e.g. motor pistons, kneading blades, drive shafts, spare

remote control, spare toothbrushes, saw blades, etc.) as

well as cleaning, maintenance or the replacement of said

parts are not covered by the guarantee and hence are to

be paid!

05-PW 1405 CB Innen 33 08.04.2005, 13:03:53 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann PW 1405 CB Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info