It is recommend t hat you run a was h cy cle with the
dishwasher empty and then remove the plug from the
socket, turn off the water supply and leave the door of
the appliance slightly open. This will help the door
seals to ast longer and prevent odours from forming
within the appliance.
If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
One of the factors that cause odors to form in the
dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
After every wash, turn off the water supply to the
appliance and leave the door slightly open so that
moisture and odors are not trap ped inside.
Before cleaning or performing maintenance, always
remove the plug from the socket.
To cle an the e xterior and rubber parts of the dishw asher,
do not use solvents or abrasive cleani ng products.
Only use a cloth with warm soapy water.
To remove spots or stains from the surface of the
interi or, use a cloth da mpened with water with a little
vinegar, or a cleaning pro duct mad e specifically for
dishwashers.
After Every Wash
Remove the Plug
No Solvents or Abrasive Cleaning
Moving the Appliance
Seals
When it is not in need for a long time
16
The installation of the pipes
and electrical equipments
should be done by professionals.
Electrical Shock Hazard
Disconnect electrical power before
installing dishwasher.
Failure to do so can result in death
or electrical shock.
The installation position of dishwasher should be near the existing inlet and drain
hoses and power cord.
One side of the cabinet sink should be chosen to facilitate the connection of drain
hoses of the dishwasher.
Cleaning the Spray Arms
The spray arms can be easily removed for periodic cleaning
of the noz zles, to prevent possible clogging. Wash them
under running water and carefu lly replace them in th eir seats,
checking that their rotary movement is in no way impeded.
Grasp the mid dle of the spray arm, pull it upwards to remove
it. Wash the arms under a jet of running water and return them
carefully to their seat. After reassembly, check th at the spray
arms turn free ly. Otherwise , check that they have been
installed correctly.
