Bedienungsanleitung Bomann UM 1374 CB (Seite 32 von 54) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

814443

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

UM1374CB_IM_new 09.05.17

Installation

Mixing Vessel

Set the mixing vessel inclined onto the motor

housing and turn it in clockwise direction to

tighten it (refer to the illustration). The mixing

vessel can be set in 4 positions.

Lid

1. Press the lid rmly onto the mixing vessel. It must seal the

mixing vessel completely.

2. Insert the cap into the rell opening of the lid. Tighten the

cap by turning it clockwise.

NOTE:

The rell opening cap can also be used as a measuring cup.

Notes on Use

CAUTION:

The glass may crack if the temperature is too high! DO

NOT ll with liquids above 60 °C.

• Place the device on a rm and at surface. Position it is

such that it cannot tip over.

• Only switch on the appliance if the mixing vessel is closed

with the lid. The rell opening in the lid must also be

closed.

• Do not overll the mixing vessel! You can ll it to a maxi-

mum of 1.5 liters. Use the scale on the jug.

• Froth requires a large capacity. Reduce quantities of

liquids which produce a lot of froth.

• Keep one hand on the lid if you are crushing ice or if there

is a large quantity of ingredients.

• Cut the food to be mixed into small pieces beforehand.

Electric Connection

• Before inserting the power plug into the outlet, check that

the mains voltage to be used matches that of the device.

You can nd the required information on the nameplate.

• Connect the device only to a correctly installed safety

socket.

Short-interval Use

The appliance is suitable for short-time operation of max.

3 minutes. Let it cool for 1 minute before using it again!

Pulse Mode

Switch to pulse mode by turning the control to the “P” position

and then release it. Use the appliance in this operating mode

for a maximum of 3 minutes.

Let it cool for 1 minute before

using it again!

Crushing Ice Cubes

The blades in the mixing vessel are also suitable for crushing

ice cubes.

• Put a maximum of 10 pieces (size approx. 25 x 25 x 25 mm)

into the mixing vessel. Use pulse operation “P” for 1 - 3

seconds. Repeat the process 8 - 12 times.

• When adding uid, you can use the “2” setting for

1 - 2 minutes.

Operation

Preparation

1. Ensure that the function switch is in the “0” position.

2. Place the mixing vessel in position.

3. Now put the ingredients that are to be mixed into the

mixing vessel.

4. Put the lid on.

5. Close the rell opening with the cap.

Mixing

Operation is carried out with the setting control:

Level 0 = off

Level 1 = low rpm

Level 2 - 3 = medium speed

Level 4 = high rpm

P = High speed in pulse mode

Adding further Ingredients to be mixed

Items to be mixed or spices can be fed in through the lling

aperture.

• Please switch off the machine before doing so.

• Before you switch the device on again, close the opening.

Stopping Operation

1. Turn the switch to the “0” position.

2. Wait until the blade comes to a complete stop.

3. Remove the mains plug from the socket.

4. Remove the mixing vessel. Turn it anticlockwise.

5. Take off the lid before pouring.

IMPORTANT NOTE:

Citrus juices and food containing acids should never be

stored in metal vessels.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann UM 1374 CB Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info