Bedienungsanleitung Bomann VL 1139 S CB (Seite 26 von 50) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

814773

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Overview of the components

1 Hook

2 Propeller

3 Motor shaft

4 Motor

5 Adjustment knob for oscillation

6 Switch housing

7 Stand/gear casing connection screw

8 Nut for height adjustment

9 Cover cap

10 Stand tube

11 Screws for mounting the foot

12 Mounting plate

13 Base

14 Operating mode switch

15 Rear protection grid

16 Fastening nut

17 Attachment ring for rear protection grid

18 Fastening screw

19 Fastening screw

20 Front protection grid

Unpacking the Device

1. Remove the device from its packaging.

2. Remove all of the packaging material such as foils, lling

material, cable holders and cardboard packaging.

3. Check the scope of delivery.

4. Check the appliance for any transport damage to prevent a

hazard.

NOTE:

There may still be dust or production residues on the surface

of the device. We recommend that you quickly wipe off the

housing with a damp cloth.

Assembly instructions

The device must be completely assembled before initial opera-

tion!

NOTE:

• You will need a Phillips screwdriver of medium size for

the assembly.

• Screws not included as accessory are already pre-

installed at the respective parts.

• Also observe the “Overview of the Components” on

page 3.

1. Place the parts of the base together in the shape of a

cross.

2. Screw the mounting plate (12) tightly to the base. For this

you should use the four crosshead screws.

3. Remove the height adjustment nut (8). Push the covering

cap (9) on to the lowest position of the upright tube (10).

Screw the height adjustment nut back on to the upright

tube (10).

4. Loosen the connection screw (7) and insert the gear cas-

ing (6) and the motor casing (4) on the stand tube. Then

tighten the connecting bolt by hand.

5. Unscrew the mounting ring (17) in an anticlockwise direc-

tion. Keep it ready to hand.

6. Position the rear protection grid (15) in place in accordance

with the recesses.

NOTE:

Please ensure that the carrying handle is facing upwards.

7. Turn the attachment ring (17) for the rear protection grid (15)

slightly in a clockwise direction.

8. Attach the propeller. Note the position of the guide pin on

the motor shaft.

9. Tighten the attachment screw (18) for the propeller in an

anticlockwise direction.

• This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental capa-

bilities or lack of experience and knowledge if they have been given

supervision or instruction concerning use of the appliance in a safe

way and understand the hazards involved.

• Children shall not play with the appliance.

• Cleaning and user maintenance shall not be made by children

without supervision.

• Do not immerse the device into water for cleaning. Please follow the

instructions as stipulated in the chapter “Cleaning”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann VL 1139 S CB Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info