Bedienungsanleitung Bomann VS 7231 (Seite 17 von 24) (Deutsch, Englisch)

688032

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

• Loosen the screws (1) on the appliance back.

Remove the cover caps (2), loosen the screws

underneath and remove the appliance cover.

• Dismount the upper door hinge (3) and lift up the

appliance door. Displace the door cover plug (4)

and set the appliance door safely aside.

• Tilt the appliance slightly backwards and block it

in this position. Unscrew the feet (5) and (6).

Disassemble the lower door hinge (7).

• Transfer and attach the lower door hinge (7) to

the opposite appliance side. Screw in the feet (6)

and (5) accordingly.

• Put the appliance back in the upright position.

Put on the appliance door and fix it its intended

position.

• Transfer and attach the upper door hinge (3) to

the opposite appliance side.

• Fasten the appliance cover and replace the cover

caps (2).

Check that the door is optimally aligned both

vertically and horizontally to ensure a smooth

opening and closing of the door.

Startup / Operation

Startup / OperationStartup / Operation

Startup / Operation

Prior to first use

Prior to first usePrior to first use

Prior to first use

CAUTION

CAUTIONCAUTION

CAUTION:

After transport, the appliance should be left standing

upright for 24 hours before connecting to the power

supply. Nonobservance could lead to malfunction of

the cooling system and causes an appliance break-

down.

Clean the appliance interior including all accessory

parts. Consider the instructions which we provide in

the chapter “Cleaning and Maintenance”.

Starting the appliance

Starting the applianceStarting the appliance

Starting the appliance

• Connect the appliance to the power supply.

• Operate the temperature control. See also the

section "Settings".

Settings

SettingsSettings

Settings

Setting [ 0 ] means that the appliance is in the off

state. Turn the temperature control clockwise, start-

ing from this setting; the appliance will turn on auto-

matically.

The power levels [ 1 – 7 ] regulate the different val-

ues of the internal temperature.

Setting

Setting Setting

Setting 0

Sett

SettSett

Setting

ing ing

ing 1

Setting

Setting Setting

Setting 7

Off state Lowest setting

(warmest inside

temperature)

Highest setting

(coldest inside

temperature)

Note that the temperature will change depending on

the ambient temperature, frequency of door opening

and the amount of food in the appliance.

During initial operation, turn the temperature control

to the highest setting first, until the appliance has

reached the desired operating temperature. After-

wards it is recommended to turn the control back to a

medium setting; correcting the temperature at a later

point would then be easier.

Interior light

Interior lightInterior light

Interior light

When opening the appliance door, the interior light

will turn on automatically.

Storing food

Storing foodStoring food

Storing food

NOTE:

NOTE:NOTE:

NOTE:

Recommendation!

Recommendation!Recommendation!

Recommendation!

To guarantee that the temperature is low enough,

you should pre-cool the appliance a few times before

initial loading foods.

CAUTION:

CAUTION:CAUTION:

CAUTION:

Always pay attention to the storage instructions on

the sales packaging.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann VS 7231 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info