Bedienungsanleitung Bomann VSE 228.1 (Seite 18 von 24) (Englisch)

552044

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

In consideration of the shown distanc-

es, hold the guide (a) at the top and

bottom inside of the furniture door; mark

the positions of the drill holes. After

drilling, fix the guide with the screws

provided.

Insert the cover (c) until it clicks in the

guide (a).

Fully open the appliance and furniture

door and join them together. Slide the

bracket (b) in the guide (a) and mark

the drill holes. Remove the bracket and

drill Ø 2 mm holes with about 8 mm

distance to the outer door edge. Put the

bracket on again; secure it with the

screws provided.

If an aligning of the furniture door is

necessary, use the slot spacing. Check

if the door is arranged vertical as well

as horizontal, so that a smooth opening

and closing of the door is ensured.

Insert the cover (D) until it clicks on the

angle (B).

Startup / Operation

Startup / OperationStartup / Operation

Startup / Operation

Prior to first use

Prior to first usePrior to first use

Prior to first use

CAUTION

CAUTIONCAUTION

CAUTION:

After transport, the appliance should be left standing

upright for about 4 hours before connecting to the

power supply. Nonobservance could lead to malfunc-

tion of the cooling system and causes an appliance

breakdown.

Clean the appliance interior including all accessory

parts. Consider the instructions which we provide in

the chapter “Cleaning and Maintenance”.

Starting the appliance

Starting the applianceStarting the appliance

Starting the appliance

• Connect the appliance to the power supply.

• Operate the temperature control. See also the

following section "Settings".

Settings

SettingsSettings

Settings

Setting [0] means that the appliance is in the off

state. Turn the temperature control clockwise, start-

ing from this setting; the appliance will turn on auto-

matically.

The power levels [1–7] regulates the different values

of the internal temperature.

Setting 0

Setting 0Setting 0

Setting 0

Sett

SettSett

Setting 1

ing 1ing 1

ing 1

Setting 7

Setting 7Setting 7

Setting 7

Off state Lowest setting

(warmest inside

temperature)

Highest setting

(coldest inside

temperature)

Note that the temperature will change depending on

the ambient temperature, frequency of door opening

and the amount of food in the appliance.

During initial operation, turn the temperature control

to the highest setting first, until the appliance has

reached the desired operating temperature. After-

wards it is recommended to turn the control back to a

medium setting; correcting the temperature at a later

point would then be easier.

Interior light

Interior lightInterior light

Interior light

When opening the appliance door, the interior light

will turn on automatically.

Storing food

Storing foodStoring food

Storing food

NOTE:

NOTE:NOTE:

NOTE:

Recommendation!

Recommendation!Recommendation!

Recommendation!

To guarantee that the temperature is low enough,

you should pre-cool the appliance a few times before

initial loading foods.

CAUTION:

CAUTION:CAUTION:

CAUTION:

Always pay attention to the storage instructions on

the sales packaging.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann VSE 228.1 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bomann VSE 228.1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info