Bedienungsanleitung Bomann WK 5005 G CB (Seite 22 von 36) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

483423

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

Technical Data

Model: ....................................................................WK 5005 G CB

Power supply: ............................................................230 V, 50 Hz

Power consumption: ..........................................................2200 W

Protection class: ........................................................................... Ι

Filling quantity: .........................................................max. 1,7 Litre

Net weight: ........................................................................1,20 kg

This device has been tested according to all relevant current

CE guidelines, such as electromagnetic compatibility and low

voltage directives, and has been constructed in accordance with

the latest safety regulations.

Subject to technical changes without prior notice!

Meaning of the “Dustbin” Symbol

Protect our environment: do not dispose of electrical equipment

in the domestic waste.

Please return any electrical equipment that you will no longer

use to the collection points provided for their disposal.

This helps avoid the potential effects of incorrect disposal on the

environment and human health.

This will contribute to the recycling and other forms of reutilisa-

tion of electrical and electronic equipment.

Information concerning where the equipment can be disposed of

can be obtained from your local authority.

CAUTION: OVERLOAD:

• If you use extension leads, these should have a cable

cross-section of at least 1.5 mm

• Do not use any multiple sockets, as this device is too

powerful.

Use

 NOTE: Always use fresh water.

1. Place the machine on a at surface.

2. Press the button in the lead in order to open the kettle. Then

ll in the water. Please only ll up to the maximum (MAX)

mark. You can read the lling level on the water level indica-

tor of the kettle.

3. Close the lid until you hear it lock in place.

4. Place the kettle ush on the base.

5. Only connect the machine to a properly installed 230 V,

50 Hz safety socket.

6. Switch on the kettle by pressing the switch. To control lamp

lights up.

7. After boiling has nished the kettle switches off automati-

cally, or you can push the switch upwards to interrupt or stop

the boiling process.

WARNING: Danger of scalding!

• When pouring the water out, keep the lid closed.

• During operation the housing becomes hot. Do not touch it

and allow the device to cool down before storing it away.

Switching off

• If you would like to turn the kettle off, push the switch

upwards and remove the plug from the socket.

• The control lamp goes off.

• Emptying the water container.

Mains Cable Take-up Device

The mains cable can be wound up on the base.

Cleaning

WARNING:

• Always turn the device off before cleaning it and remove

the mains plug. Wait until the device has cooled down.

• Never immerse the device or the base in water or other

liquids.

CAUTION:

• Do not use any wire brush or other abrasive objects.

• Do not use any acidic or abrasive detergents.

• Rinse the water container out with clean water. Then dry it

off with a cloth.

• Clean the housing after use with a slightly damp cloth.

Filter

There is a permanent lter in the spout. In order to clean the

lter, remove it from the movable frame.

• Pull the right-hand tab inside the kettle.

• Remove the lter.

• Rinse out the lter with running water. You can use a nylon

brush.

• Put the lter back in position: insert rst of all the axle into

the left-hand guide groove of the frame. Then press the lter

into the frame. It must be heard to click into place.

 NOTE:

The lter is correctly inserted if it can be moved together with

the frame.

Decalciﬁcation

• The frequency of the decalcifying operation depends on the

hardness of the water and on how often the appliance is

used.

• If the machine switches off before the water boils, it probably

needs to be decalcied.

• Please do not use vinegar but a commercially available

decalcication agent on the basis of citric acid. Only use the

quantities stated in the instructions.

 NOTE:

After descaling the device boil fresh water in it several times

(approximately 3-4 times) in order to remove any residues. Do

not consume this water.

Troubleshooting

• It is not possible to switch the machine on.

 PossibleCause:

After being used without or with too little water the machine

has not cooled down sufciently.

 Remedy:

Allow the machine to cool down for 15 min.

• The machine switches off before the water has boiled.

 PossibleCause:

The heated base is coated with too much lime or the circuit

of the plug is overloaded.

 Remedy:

Descale the machine as instructed.

Check the mains connection.

• The machine does not switch off.

 PossibleCause:

The lid is not closed or the lter is not inserted.

 Remedy:

Close the lid until it locks in place or re-insert the lter.

05-WK 5005 G CB Neu.indd 22 12.10.2010 11:16:11 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann WK 5005 G CB Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info