Bedienungsanleitung Bomann WKS 1361 CB (Seite 22 von 36) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

483424

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

• The device switches itself back on when placed on the

base.

 PossibleCause:

The switch is turned on.

 Remedy:

Press the switch upwards.

Technical Data

Model: .................................................................... WKS 1361 CB

Power supply: ............................................... 220-240 V, 50/60 Hz

Power consumption: .................................................1850-2200 W

Protection class: ........................................................................... I

Filling quantity: .........................................................max. 1.0 Litre

Net weight: .........................................................................0.92 kg

This device has been tested according to all relevant current

CE guidelines, such as electromagnetic compatibility and low

voltage directives, and has been constructed in accordance with

the latest safety regulations.

Subject to technical changes without prior notice!

Meaning of the “Dustbin” Symbol

Protect our environment: do not dispose of electrical equipment

in the domestic waste.

Please return any electrical equipment that you will no longer

use to the collection points provided for their disposal.

This helps avoid the potential effects of incorrect disposal on the

environment and human health.

This will contribute to the recycling and other forms of reutilisa-

tion of electrical and electronic equipment.

Information concerning where the equipment can be disposed of

can be obtained from your local authority.

Use

1. Place the machine on a at surface.

2. Opening the Lid

• First press the locking mechanism in the direction of the

handle.

• Then pull the lid upwards.

3. Then ll in the water (max. 1 Litre). You can read the lling

level on the water level indicator of the kettle.

4. Close the lid until you hear it lock in place.

5. Place the kettle ush on the base.

6. Electrical connection

• Check whether the electrical voltage that you intend to

use is the same as that of the machine. Details are to be

found on the label on the base.

• Only connect the machine to a properly installed 230 V,

50 Hz safety socket.

7. Switch on the kettle by pressing the switch. The water level

indicator is illuminated during the entire boiling process.

Switching off/Interrupting Operation

There are two ways to stop/interrupt the boiling process:

• The appliance switches off automatically after the water has

boiled.

• You can press the switch upwards in order to stop or inter-

rupt the boiling process.

WARNING:

• Do not remove the appliance from the base without

switching it off beforehand. As long as the switch is in the

lower position the kettle is switched on.

• Always switch the device off before you remove it from the

base! Please also ensure that it is switched off when you

put it back on the base!

WARNING: DANGER OF SCALDING!

• When pouring the water out, keep the lid closed.

• During operation the housing becomes hot. Do not touch it

and allow the device to cool down before storing it away.

• Remove the mains plug.

• The illumination in the water level indicator goes off.

• Emptying the water container.

Mains Cable Take-up Device

The mains cable can be wound up on the base.

Cleaning

WARNING:

• Always turn the device off before cleaning it and remove

the mains plug. Wait until the device has cooled down.

• Never immerse the device or the base in water or other

liquids.

CAUTION:

• Do not use any wire brush or other abrasive objects.

• Do not use any acidic or abrasive detergents.

• Rinse the water container out with clean water. Then dry it

off with a cloth.

• Clean the housing after use with a slightly damp cloth.

• There is a permanent lter in the spout. In order to clean the

lter, pull it out with the lid open. Rinse out the lter with run-

ning water. Reinsert it, taking note of the guide mechanism.

Decalciﬁcation

• The frequency of the decalcifying operation depends on the

hardness of the water and on how often the appliance is

used.

• If the machine switches off before the water boils, it probably

needs to be decalcied.

• Please do not use vinegar but a commercially available

decalcication agent on the basis of citric acid. Only use the

quantities stated in the instructions.

 NOTE:

After descaling the device boil fresh water in it several times

(approximately 3-4 times) in order to remove any residues. Do

not consume this water.

Troubleshooting

• It is not possible to switch the machine on.

 PossibleCause:

After being used without or with too little water the machine

has not cooled down sufciently.

 Remedy:

Allow the machine to cool down for 15 min.

• The machine switches off before the water has boiled.

 PossibleCause:

The heated base is coated with too much lime or the circuit

of the plug is overloaded.

 Remedy:

Descale the machine as instructed.

Check the mains connection.

• The machine does not switch off.

 PossibleCause:

The lid is not closed or the lter is not inserted.

 Remedy:

Close the lid until it locks in place or re-insert the lter.

05-WKS 1361 CB.indd 22 17.08.2010 9:42:50 Uhr

Bomann WKS 1361 CB Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info