Bedienungsanleitung Bomann WT 5023 (Seite 8 von 16) (Englisch)

688015

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

• Softeners or similar products should be used as specified in the sof-

tener instructions.

• Remove all objects from pockets, such as matches and lighters.

• Close zips, buttons, or hooks before drying. Tie loose straps or loops

together.

Adding laundry

Adding laundryAdding laundry

Adding laundry

• Shake out the washed fabrics and sort them ac-

cording to the required drying setting, fibre, and

fabric type, size, as well as remaining moisture af-

ter spinning. This will make the drying very con-

sistent.

• Do not overload the appliance. Each load should

correspond to the rated capacity of the appliance.

• Ensure that no items of washing are trapped in

the door.

Control panel

Control panelControl panel

Control panel

1 Program selector switch

1 Program selector switch1 Program selector switch

1 Program selector switch

To select a drying program, turn the program selector

switch to the appropriate position.

For details about the programs, see the "Program

table".

2 EIN/AUS (Power)

2 EIN/AUS (Power)2 EIN/AUS (Power)

2 EIN/AUS (Power)

Button to switch the appliance on and off.

3 START/PAUSE

3 START/PAUSE3 START/PAUSE

3 START/PAUSE

Button to start / stop the selected or running pro-

gram.

4 SIGNAL

4 SIGNAL4 SIGNAL

4 SIGNAL

Button to switch the signal tones at the end of the

program on and off.

Signal off Signal on

5 INTENSITÄT

5 INTENSITÄT5 INTENSITÄT

5 INTENSITÄT

(Intensity)

(Intensity) (Intensity)

(Intensity)

By repeatedly pressing the button, you select one of

three degrees of drying before starting the program.

The control lamps indicate the selection.

6 6

STARTVORWAHL

STARTVORWAHLSTARTVORWAHL

STARTVORWAHL

(Sta

(Sta(Sta

(Start delay)

rt delay)rt delay)

rt delay)

By repeatedly pressing the button, the program start

can be changed about 3, 6 or 9 hours. Press the

START/PAUSE button and the unit will start automat-

ically after the selected time has elapsed.

7 7

KNITTERSCHUTZ (Ant

KNITTERSCHUTZ (AntKNITTERSCHUTZ (Ant

KNITTERSCHUTZ (Anti

-crease)

crease)crease)

crease)

Button to select the anti-crease function.

8 8

Child safety lock

Child safety lockChild safety lock

Child safety lock

To activate / deactivate, press the button combina-

tion for about 3 seconds.

9 9

Flusenfilter

FlusenfilterFlusenfilter

Flusenfilter

The control lamp lights up when the lint filter needs to

be cleaned.

1010

LED Displa

LED DisplaLED Displa

LED Display

Display for settings and information:

- The start delay is selected via the display and its

remaining time is displayed. The program will start

after [x] hours.

- After the program starts, the remaining time is dis-

played as [x:xx] hours and minutes.

- Error codes are displayed in the event of a fault.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann WT 5023 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bomann WT 5023

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info