Bedienungsanleitung Bompani BO243 (Seite 6 von 20) (Englisch)

476971

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

3. APPLIANCE OPERATION

When the control is ﬁrst turned on, the display shows the clock set at 12:00, which can be increased by one unit every minute. The

oven is off and the possible operations for unblocking it are: the “Clock setting” procedure or, in alternative, directly turning it on. The

detailed operations for setting the clock, the timer, duration, and end of cooking process are indicated in the relevant paragraphs that

follow. Through a single setting key, the oven cyclically enters into the display and modiﬁcation mode (shown on the ﬂashing display),

in which the “+” and “-“ keys are activated to correct the value indicated on the display. This value is, however, accepted after 4 sec-

onds from the last time the key is pressed (the display stops ﬂashing).

3.1. CLOCK SETTING

Scroll through the menu with the Timer Mode key until “hour” is displayed, and set it using the “+” and “-“ keys. The clock can only be

set with the oven in stand-by.

3.2. TURNING OVEN ON/OFF

Press and release the “O/I” key. “ON” will appear on the central display, the symbol lights up, as well as the light inside the oven. If

after a minute a cooking mode was not selected, the oven and the symbol turn off, and “OFF” will appear on the display. To turn the

oven off during cooking, press and release the 0/l key. With the key activated, it must be released at least 1” after being pressed.

3.3. TIMER

This function does not interact with loads, and it is always available regardless of the state the oven is in. Press the “Time” key, the

bell symbol lights up, and the display shows what is explained in paragraph 2.2. Set the desired value in minutes using the “+” and

“-“ keys, up to a maximum of 180 minutes. After 4 seconds without increasing or decreasing ,the information is accepted, and the bell

remains lit. Once the time set has lapsed, an acoustic signal is heard, and the bell symbol ﬂashes. To stop both the acoustic signal

and the ﬂashing symbol, just press any key; its associated function is normally not carried out (it is only needed to stop the signal).

3.4. SEMI-AUTOMATIC COOKING TIME FUNCTION

Turn the oven on, as indicated in paragraph 3.2. Pres and release the “Time” key, until “dur” appears. Set the time required for cooking

using the “+” and “-“ keys, up to a maximum of 180 minutes. Select a cooking function among those available, as indicated in paragraph

3.9: the oven will suggest a predetermined temperature. The temperature can be changed. After 4 seconds from the last time the key

was pressed, the oven turns on for the time set. After the time deﬁned has ended, the oven enters the Cooking Ended mode.

3.5. SEMI-AUTOMATIC COOKING END FUNCTION

Turn on the oven as indicated in paragraph 3.2. Press the “Time” key until “End” appears. Use the “+” and “-“ to set the cooking end

time, which must occur within the next 23h59m. To enter the time, the same steps should be followed as those for the clock setting

(current time). After 4 seconds from the last time the key was pressed, the oven turns on for the time set. A cooking function among

those available can always be selected. The oven suggests a predetermined temperature. The temperature can be changed. Once

the time speciﬁed has bee reached, the oven enters into the Cooking End mode

3.6. AUTOMATIC FUNCTION

Turn the oven on as indicated in paragraph 3.2. Press and release the “Time” key until “dur” appears. Set the cooking time required

using the “+” and “-“ keys, until a maximum of 180 minutes. Press the “Time” key again until “End” appears. Use the “+” and “-“ keys to

set the cooking end time, which must occur within the next 23h59m. After 4 seconds from the last time the key was pressed, the oven

enters the delayed start mode: it will then automatically turn on for the length of time speciﬁed and will stop at the stop time speciﬁed,

entering the Cooking end mode. Even during the delayed start phase, the temperature and the function are both displayed, and both

can be changed. All the oven loads are deactivated once the oven must start. The symbol will show the element selected, but will

maintain the light off symbol and the stopped fan symbol. The tangential fan runs according to the indications speciﬁed in paragraph

0, while the oven light is separately illustrated in paragraph 3.13

3.7. COOKING END MODE

Once the timed cooking process has terminated, the oven turns off all the loads, and a triple intermittent acoustic signal of average

intensity is heard. The display temperature and functions turn off. The clock display shows the time, and the two “pot” and “auto”

symbols ﬂash. To unblock the oven, just press any key among those positioned under the display: the acoustic signal stops, and the

oven is ready to receive new commands. It is possible to immediately select a new cooking function, or completely turn off the oven

by pressing the “O/I” .

Instructions

AUS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bompani BO243 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bompani BO243

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info