Bedienungsanleitung Bompani BO243 (Seite 15 von 28) (Englisch, Holländisch, Französisch, Italienisch)

476971

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

GB Installation

Technical data

HEATING ELEMENT POWERS

bottom element 1.5 kW

top element 0.7 kW

oven circular element 2.0 kW

grill 2.0 kW

fan 25 W

oven light 15 W

TOTAL ELECTRIC OVEN POWER

static oven 2.21 kW

fan oven 2.0 kW

multi-oven 2.21 kW

multifunction oven 2.7 kW

EQUIPMENT

Depending on the models, cooker may have:

- Self-cleaning enamelled liners

- Rotisserie

- Mechanical timer

- Digital-clock end of cooking timer

- Single-control end of cooking timer

- Electronic timer

For the ELECTRIC WIRING DIAGRAM see figure 2 at the back

of this manual.

The electrical power is stated on the nameplate. The nameplate

can be seen when the oven door is opened.

INSTALLATION

The appliance must be installed by qualified staff working in

accordance with the regulations in force.

The appliance is produced to EN 60 335-1, EN 60 335-2 and is

of built-in type, meaning that it must be installed in accordance

with the producer’s instructions.

The oven must be installed in a unit having materials (varnishes,

finishes, glues, etc.) resistant to a temperature of at least 100°C.

The dimensions of the compartment for built-in installation are

shown in Fig. 1.

Pre-fit the 4 screws (see fig. 3) using the tapered holes provided

in the front side visible with the oven door open, on the 4 square

black spacers, taking care that the tips of the screws just project

from the spacer.

Fit the oven into the unit and screw in the screws until

completely tight.

If the oven is to be installed close to other household appliances,

check that there will be no mutual interference during operation.

Their respective electrical connections must be separate.

Suitable ventilation should be assured by means of an opening

in the top of the column unit, or an opening of 10 mm above the

oven surround. See fig. 1.

CONNECTING TO THE ELECTRICAL MAINS

Before making the connection, check that:

- the mains voltage is as indicated on the nameplate;

- the earth connection is in good working order.

If the socket is not easily accessible, the installation engineer

must provide a switch with a contact breaking gap of 3 mm or

more.

If the appliance power lead is not fitted with a plug, use an

approved standard type, remembering that:

- the green-yellow wire must be used for the earth connection;

- the blue wire is the neutral;

- the brown wire is live;

- the lead must never touch hot surfaces over about 75 degrees

- replacement leads must be of type H05RR-F or H05V2V2-F

of suitable size (see diagrams in fig. 2).

- if the appliance is supplied without lead, using type H05RR-F

or H05V2V2-F cable of suitable size (see diagrams in fig. 2).

IMPORTANT: the manufacturer declines all liability for damage

due to failure to comply with the regulations and standards in

force. Check that the appliance is correctly connected to the

earth (see diagrams in fig. 2 at the back of the manual).

Usable dimensions oven

Width cm. 41,0

Depth cm. 39,4

Height cm. 31,0

Volume l. 50

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bompani BO243 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bompani BO243

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info