476989

Bompani BO690 Seite 17

17
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
17
CAUTION: The spit forks may have sharp points. Handle with
care.
OVEN LIGHT/ROTISSERIE SWITCH
- Gas cooker models are fitted with a round switch;
- press this to turn on both the oven light and the rotisserie motor;
- gas-electric cookers (1 or 2 electric plates) are equipped with a
round switch with a red pilot light;
- this light comes on while 1 or 2 electric plates are in operation.
OPTIONAL MULTIPLE SPIT KIT
- Your rotisserie (which has 2 forks) can be equipped with an addi-
tional multiple spit mechanism.
- This can be ordered from your dealer at an additional charge.
FITTING THE MULTIPLE SPIT
- Remove the standard forks;
- place and secure the flanges on the spit element as shown in figure
16;
- impale the foods on the spits;
- insert the spits on the flanges as shown in figure 16;
- CAUTION: the two identical flanges "A" must be placed at the
ends.
FOR COOKERS WITH MECHANICAL SPRING CLOCK ( fig.17 )
The spring clock can be set for a maximum time of one hour by turning
the regulator knob clockwise to the time required. After the pre-set
time, a buzzer sounds and will stop automatically. When the buzzer
sounds, the spring clock does not cut out operation of the oven.
USE OF THE ELECTRONIC TIMER (fig. 18)
This allows the start time and cooking duration time to be programmed.
If food does not need to be watched, this timer can be selected even
when the user is absent. Soon after installation and at any electrical
supply cut-outs the display flashes; the clock must then be synchro-
nized again to allow programming.
SETTING THE TIMER TO THE CURRENT TIME
- The current time is set by pressing the 2 buttons (COOKING TIME
and STOP) and the "+" or "-" button at the same time. Any previous
programmes are cancelled and the AUTO symbol flashes.
NOTE: when the AUTO symbol is flashing the oven cannot be used
manually.
"+" AND "-" BUTTONS
- Pressing the "+" or "- "buttons makes time go up or down at variable
speed according to how long the button is pressed for.
MANUAL USE
- Press the MANUAL button: the AUTO symbol goes out (if flashing or
permanently on) the SAUCEPAN symbol lights up and the oven can
be used by adjusting the thermostat knob and the selector switch
according to the instructions given in the manual.
AUTOMATIC OPERATION WITH END OF COOKING AND DURA-
TION TIMERS
- Let’s use an example: it is 9:25 am; you want the oven to switch on
at 11 am and switch off at 12 pm (cooking time 1 hour).
- Press the COOKING DURATION button and within 5 seconds press "+"
button until it shows 01.00, adjust using "-" button if necessary. The
AUTO and PAN symbols come on permanently.
- Press the END OF COOKING button and within 5 seconds press "+"
button until it shows 12.00. The PAN symbol goes out but the AUTO
symbol remains permanently on.
- Move the oven thermostat knob to the desired temperature, and the
selector switch to the required cooking method; the red warning light
comes on the oven light comes on and the timer is ready to start: at
11am the oven will come on automatically and the PAN symbol will
light up.
- When cooking is over (12 am) the AUTO symbol flashes, the PAN
symbol goes out and a buzzer sounds; to turn off the buzzer press
any button.
- Move the thermostat and selector knob to the OFF position.
SEMI-AUTOMATIC OPERATION WITH COOKING DURATION
SELECTION
- Let’s take an example: it is 11:35 am and you want the oven to stay
on for 25 minutes from now on.
- Press the
COOKING DURATION button and within 5 seconds press the
"+" button until it shows 00.25, adjusting the time with the "-" button
if necessary. The
AUTO and PAN symbols light up permanently.
- Turn the oven thermostat knob to the desired temperature and the
selector switch to the required cooking method; the red warning light
comes on, the oven light comes on and the oven starts to operate.
- After 25 minutes the oven and the PAN symbol go out. The AUTO
symbol flashes and the buzzer tells you that cooking is over: to turn
off the buzzer press any button.
- Then move the oven thermostat knob and the selector switch to the
OFF position.
MINUTE MINDER
- Press the MINUTE MINDER button and choose the desired time using
the "+" or "-" button.
- The BELL symbol lights up when the minute minder is in use.
- When the pre-set time is over, the buzzer sounds and the
BELL
symbol goes out.
BUZZER
- The buzzer sounds at the end of a programme and lasts for a maxi-
mum of 7 minutes.
- To turn it off, press any button.
- Pressing the "-" button without having previously selected a function
the frequency of the signal changes. A selection from 3 possibilities
can be made. The selected signal is audible as long as the "-" button
is pressed.
STARTING AND CHECKING A PROGRAMME
- The programme starts after about 4 seconds of it being set.
- The set programme can be checked at any point by pushing the
corresponding buttons.
PROGRAMMING ERRORS
- Example: at 12:15 pm a COOKING DURATION time of 30 minutes
is set and a END OF COOKING is programmed in at 12:30 pm.
- The programme error can be rectified by changing the duration or
the end of cooking time, or by pressing the MANUAL button and
programming again.
- If there is a programming error the oven will not come on.
ANNULLING A PROGRAMME
- A programme can be cancelled by pressing the COOKING DURA-
TION button and then the "-" button until the display shows 0.00.
IMPORTANT:AT THE END OF EVERY PROGRAMMED COOKING
OPERATION YOU ARE ADVISED TO PRESS THE
BUTTON,
OTHERWISE THE OVEN CANNOT BE OPERATED MANUALLY.
HOW TO USE OVEN ACCESSORIES
- The oven shelf is designed to take normal oven dishes for cook-
ing sweets or roasts, or is used without a pan for cooking foods
under the grill.
- The drip pan under the grill is used to collect juices, which drip
from the food that is cooked directly on the grill. The drip pan can
also be used for cooking
- Remember that cooking times may vary if food is cooked on two
shelves at the same time.
HOW TO USE THE CERAMIC HOB
The hotplate power has a sequential control device which ensures
excellent control of the cooking temperature.
The heat settings are from 1 to 6. The knob can be set in the re-
quired position by turning it to right or left.
On dual circuit plates, the knob only turns clockwise and the heat
settings are from 1 to 6, for the central zones of the plates only.
If the knob is turned forward another notch after the last heat set-
ting, the other zones of the plates will switch on.
For the user
GB
… 17 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bompani BO690 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info